My Hitachi Ultravision 60V500 was recently damaged during our move to a new state. The TV turns on fine and looks normal except for a black block shape at the lower right hand of the screen. It looks to me like something may have shifted in front of the projection unit during shipping. The block is very defined, not cloudy, which leads me to beleive it may just be something in front of the projection unit. Is this a fixable issue? Any help appreciated!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your TV has a defective optical block which should be replaced by a TV technician only. Due to the cost of the part and labor, it is almost less expensive to replace the TV. The part number for the optical block is UX23751 and is available at the following web site. I hope that helps : )
It is most likely the tube going out. Find some one to replace the tube if the TV is fairly new other wise it is going to be a trend. One tube now and another.. and so on. Ride it out as long as you can then go for an upgrade
Good Day, LDS also; You may have a poor seated cable connector. Unplug TV from A/C, remove back look for a large black connector. It connects between the Main Digital Module and the Drive PWB. Re-insert both ends several times to make better contact, use contact cleaner if have but not always needed. Good Luck, big IRISH.