I got my casio july 2006, and have only dropped it once and it landed on carpet, and continued to take pictures okay. About a week after it seemed as though it was over exposing pictures. It takes pictures perfectly fine when its dark out, but when there is a light on in the room or its outside during the day, the pictures are very light and have lines through them, and parts of the pictures appear blurry. Is it worth trying to get it fixed? Or just get a new camera?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the tc(traction control) light is on because the abs light is on, 99 percent of the time its a bad speed sensor, most speed sensors go bad due to a bad wheel bearing. if your driving and hear a slight or loud humming sound from the front of the vehicle then replace both front wheel bearings and your lights will go out
GE has a fix for frozen water line in freezer door. WR49x10173 is a heater kit that is installed in the dispenser area. It uses a minor amount of energy, but enough to keep the area warm. You have to pull off the dispenser board, remove the 4 screws to remove the dispenser cradle and unplug the wiring. Then follow instructions to crimp on the heater wires. Allow about 3 days for frozen water line to defrost. .
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).
Hi, The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to Casio service centre. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost. Thank you
The camera might not of had been dropped or abused at that moment, but it sounds like one of your ribbons is not full connected to its port due to a previous unnoticeable drop or mishandling. In other words, if you are savvy enough to open the camera, remove the ribbons (2 of them, found on the front side of the camera coming from the lens) and re-insert them into their ports. I have only needed to do this once on this particular camera, but at least 30 times on the Exilim line of Casio cameras. Hope this helps.
look for the reset to factory settings for your casio. i could also be the settings have been changed so more light is coming in the camera which explains your bright pictures. but the lines across ALL the pictures warn something of a CCD/Cmos sensor problem.