Question about Blaupunkt Seattle MP74 CD Player

1 Answer

Demo display keeps running

I just bought a used car that came equipped with this reciever, but no manual for it. I've been able to figure out how everything works except that instead of the spectrum coming on after the music starts playing, I get to watch the neverending display of what all the reciever is capable of. I've checked and it says the spectrum is on, so I don't really know what else to do.

Posted by Carmen Henry on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 135 Answers

Here is a link to your owner's manual: http://www.blaupunkt.com/us/download/SeattleMP74.pdf It says: Activating / deactivating demo mode The device is supplied from the factory with demo mode activated. The various functions of the device are displayed graphically as animations in the display during demo mode. You can also deactivate demo mode. ➮ Press and hold down the MENU button for longer than four seconds to activate/deactivate demo mode.

Posted on Apr 19, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5helpful
1answer

I ve Sony Bravia KDL55EX713 55" TV, it keep showing me input banner showing(Bravia,LED,presence sensor,Motion flow,Full HD, BE3, WIFI HDMI etc.) I have tried display button, and all settings on...

Your TV is in store demo mode.

To fix this, access the TV's menu and find the option to run initial setup. At the beginning of initial set-up, you'll be asked whether or not the TV should be put into Home or Retail mode. Choose Home.
2helpful
1answer

I CANNOT SWITCH OFF THE EQUIPMENT ,AS SOON AS I GET TO SWITCH OFF THE HI FI IN A FEW SECONDS THE EQUIPMENT SWITCH ON AGAIN AND I CAN SEE THE WORD DEMO ON THE SCREEN

RTFM: Page 13:

"A demonstration of the display is shown if you have not set the
clock. You can reduce the power consumed in standby mode by turning the demonstration off.
While the unit is on:
Press and hold [–DEMO] until “NO DEMO” is
displayed.
Each time you press and hold the button:
NO DEMO (off) DEMO (on)

This is a 24-hour clock.
The example shows how to set the clock for 16:25 (4:25 p.m.).
1 Press [0/I] to turn the unit on.
2
Press [CLOCK/TIMER] to display “CLOCK”.
Each time you press the button:
CLOCK>>PLAY>>REC>>Original display
Within 5 seconds
Press [SET].
3
Press [TUNING (Up or Down)] to set the time.
The time display can be changed in one minute units by tapping
the buttons, and quickly by holding down the buttons.
Press [SET].
The time is set and the original display is restored."


Or under Troubleshooting Page 38:

"The display starts up even after the unit is turned off.

The demonstration feature (–DEMO) is on. Turn it off if it is not required."

If you need the manual go to
http://audio.manualsonline.com
register and get it for free.
4helpful
2answers

Stuck in demo mode. how do i change it?

Hello jayme84,

To cancel "DEMO" mode on the JVC:

Enter the PSM (personal settings mode) and turn DEMO off.

1) Press and hold "SEL" until the display changes.
2) Use the left/right rocker switch until "DEMO ON" is displayed.
3) Turn the volume knob to select "DEMO OFF".
4) Press "SEL" to exit.

Hope this helps.
1helpful
1answer

I have a CQ-RX400 car stereo that i just bought and the front display keeps flashing from ipod-reading-cd-usb Etc. and i just want it to stay at the time or radio station name. how do i do this?

You have to turn off the "DEMO" mode on your Panasonic radio. Check your owner manual for more detail. By default the radio run in "DEMO" mode when you use it for the first time!
14helpful
3answers

I have a Pioneer XC-F10 Stereo CD Tuner. I keep trying to turn it on and it keeps turning off immediately...?

I Have managed to solve my instant turning off fault. As its been mentioned before, this is a demo mode fault, heres what I did...

Leave the Unit in standby, and press and hold the "system menu" button you should see the words "demo mode" flash up on the display briefly, at this point press the "set" button to enter demo mode selection finally press the "+" or "-" button to turn the demo mode off.

You have to be quick with the remote buttons when getting into the demo mode, might take a few trys.

I'm not sure if this will fix everyones fault, but certainly helped with mine. Good Luck.
0helpful
1answer

Get out of demo mode

Push the control knob towards fm or am.......select the demo display......press teh control knob for at least 2 seconds....that should do it
4helpful
3answers

Turn the demo mode off on my kenwood KDC-W3037

Hi the way I fixed it was to put the unit in standby then hold in the menu button (left hand side next to control button)Then move the control button (right hand side) until you get to demo on. Then hold in the control button until it shows demo off. Job done. Also you can activate the aux settings from here to. Hope this helps Shane
0helpful
1answer

JVC KD-G322 Demo mode

Hold down the "SEL" button, and use the CD track skip button to scroll to where the display says "DEMO," and use the volume knob to change the setting to "OFF." Push SEL again and you're good to go.
3helpful
1answer
Not finding what you are looking for?
Blaupunkt Seattle MP74 CD Player Logo

Related Topics:

552 views

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Pierre Laplante

Level 3 Expert

2061 Answers

Are you a Blaupunkt Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...