Mac can't find the driver for the Multimag 4000 - using cyberview

What type of computer (OS version)? If you mean a SmartDisk SmartScan 2700, it only worked with Windows XP and 2000 and Mac OS 10.3 and 10.4 with the original software. There is a work-around for more recent OS versions. You need to find a copy of CyberView X that is compatible with your OS. This installs the driver for the film scanner. I found this page, https://cyberview-x.software.informer.com/ , with the Windows version of the driver software through Google. Then you can buy and install the VueScan software, https://www.hamrick.com/vuescan/smartdisk_smartscan_2700.html . The software has a free version for testing. However, neither the free or standard version support scanning film. You can buy the software either as a monthly subscription or a one-time purchase.

I hope this helps. In general, you need to install the driver before connecting the USB cable between the scanner and your computer.

Cindy Wells
(Note: I use the free version of VueScan to keep an old scanner available for infrequent single page scans.)

this is from the Braun site in Nuernberg, Deutschland:

HP Marketing Corp.

Tel.: 001-973-80 89 010

P.O. Box 715

Fax: 001-973-80 89 004

Pine Brook, N.J.07058

Email: [email protected]

Adobe Photoshop 6.0.1 CS
PWW600R6862670-965
Adobe Photoshop 6 - Unlimited PWW600U4353670-298 or PWW600U2641042-866
.

The following downloads provide the Photoshop CS6 beta installer for Mac Note: You do not need a serial number to install and use the beta. Simply select "Try. I want to try Adobe Photoshop CS6 for a limited time." in the Welcome Screen when you start the installation process.

English

Download Photoshop CS6 beta for Mac (DMG, 984 MB)

hope it helps

Adobe Photoshop CS2 have some system requirements to be meet before installation, the requirements are listed below: (if you don't meet any of the minimum you should upgrade your hardware to install this software) (hopes this helps)
Processor

• To run Photoshop CS2, PC users should have one of the following processors: Intel Centrino, Xeon, Xeon Dual, Pentium III or a Pentium 4 processor.
  Mac users who want to install Adobe Photoshop CS2 need at least a PowerPC G3, G4 or G5 processor.
  

Operating System

• Photoshop CS2 requires at least a PC that runs Windows 2000 or Windows XP. Windows 2000 users need Service Pack 4. Windows XP users need Service Pack 1 or Service Pack 2.
  Mac users can run Photoshop CS2 on OS X versions 10.2.8 through 10.3.8 at least. However, Adobe recommends versions 10.3.4 through 10.3.8.
  

RAM

• Both PCs and Macs can run Photoshop CS2 with 320 megabytes of RAM though Adobe recommends running the program with at least 384 megabytes of RAM.
  

Hard-Disk Space

• Before installing Adobe Photoshop CS2 on a PC, make sure you have at least 650 megabytes of hard-disk space free.
  If you are installing CS2 on a Mac, check to make sure you have at least 750 megabytes of hard-disk space available.
  

Monitor and Video Card

• Adobe Photoshop CS2 works best on monitors with a resolution of at least 1024 by 768. A 16-bit video card is also required. These requirements apply to both PC and Mac users.
  

You need to install a CyberView X scanner driver to use this scanner on Windows and Mac OS X.
On Mac OS X, you need to run VueScan with Rosetta, since CyberView X is a PowerPC program. To do this:

1. Click on the VueScan icon while holding the Control key
2. Choose 'Get Info'
3. Check 'Open using Rosetta'

Driver available here http://www.latestdriversupdate.com/driver/36681.html

I know I had solved this a few weeks back. I am sifting through my post... I remember http://www.markwilson.co.uk/blog/2006/10/installing-nikon-scan-4-as-photoshop.htm but I know there is more to is

look at Marks ostings while I search

1)Here is the Link to get the toolbox CLICK HERE 2)As for the plugin (Applications>CanoScan Toolbox 4.1>Plug-Ins) put one here after you have the toolbox installed 3)You must have photoshop of any version to do the next step 4)If you do Put it here (Where ever your photoshop folder is> Plugin)
And go mac's

I found this scanner at a garage sale today, and had trouble finding this info myself. Finally stumbled upon this site ( http://cadwell.livejournal.com/39545.html )

I'm using it on a Powermac G5 but both the driver and toolbox app say they are univeral binary. Hopefully this gets you up and running too:

CanoScan LiDE 30 on Mac OS X 10.5
This technical help may seem completely out of place on this art blog but after scouring the internet for 3 hours trying to set my 6 year old scanner up on my new MacBook, I found this info half way down a lengthy comments section of a random blog. So I thought I'd post it here (slightly altered) as a message in a bottle to anyone else in need of it.

How to set up CanoScan LiDE 30 on Mac OSX 10.5
STEP 1:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=6623
STEP 2:
Select MAC OS X
STEP 3:
Download BOTH:
LiDE 20/LiDE 30 Scanner Driver Ver. 7.0.1.1aX
(Mac OS X)
lide20lide30n670un676un1240uosx7011aen.dmg
CanoScan Toolbox Ver. 4.1.3.0X
(Mac OS X)
CSTb4130MXE.dmg.gz
STEP 4:
INSTALL CanoScan Toolbox Ver. 4.1.3.0X
STEP 5:
INSTALL LiDE 30 Scanner Driver Ver. 7.0.1.1aX . Make sure Applications>CanoScan Toolbox 4.1>Plug-Ins is selected as the install location.
STEP 6:
You will be asked to RESTART. You should.
STEP 7:
When you run CanoScan you can choose Photoshop as the default program to open the image in once it has scanned. You do not need Photoshop to open using Rosetta for this to work.
NOTE: If you want to scan directly from within Photoshop CS3, you need to copy the driver 'ScanGear CS 7.0X' which is found in Applications>CanoScan Toolbox 4.1>Plug-Ins into the photoshop pluggins folder, Applications> Adobe Photoshop CS3>Plug-Ins>Import/Export. You also need to open photoshop in Rosetta mode. Apple + I on the photoshop icon and select 'Open using Rosetta'. I would not recommend using this method though.
STEP 8:
Go to System Preferences>Accounts>Login Items and remove both of the following:
N067U_ButtonManager.app
N124U_ButtonManager.app
STEP 9:
SCAN.

Try updating your scanner driver/software to isolate the problem. If same issue still occurring after uninstalling/reinstall, then source of the problem may be a CCD/lamp failure or some sort of dust, lint, on CCD causing calibration failure.