Ip connection problem

I have the exact same problem. I end up with limited connection. Same machine on Linux connects to the same network without any problem.

The Draytek Vigor router supports USB-based Wide Area Network, or WAN, modems. It has four 10/100 Base-T ports, Network Address Translation IP packet filtering firewall, Demilitarized Zone and Virtual Private Network. The initial setup requires installing the firmware. Then, connect the USB router to the modem, in order to upload the firmware automatically to the modem.

It is an issue the Draytek and your phone.

Draytek displays as a web page. It uses HTML or XHTML
In order to see it on your phone it needs to be coded in XHTML Mobile 1.0

The easiest solution is to use a simple router (wired-only) to connect to your Internet Service Provider.

Run a cable from one of the LAN ports on the router to a wired/wireless router, to provide access for the first company's computers.

Run another cable from another of the LAN ports on the router to a wired/wireless router, to provide access for the second company's computers.

Hi,

These are the general steps to all wireless connectivity.

Click the link below for proper cable connections in setting up your wireless network.

This link also provides somewhat a checklist on what you need for wireless connectivity.

http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:

Windows XP. http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

Windows Vista. http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Windows 7. http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network

I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!

Mongkey

"Understanding explains better..."

i have a very simple application called netscan. just search it in google and download it. then put the ip address aproximately and you will be able to see who is in the network.

Right click on the wireless icon>Status>Details and note the Gateway address. Type that into the address

I have exactly the same problem on a couple of Sraytek 2820vm. Did you solve the problem?

Regards Herbert

Make sure to install the drivers that came with the internet dongle. Just run the setup CD the that came with it, when it asks you to plug the dongle, please do. That should guide you through the whole setup process.

There is no default username or password to access the Vigor routers. Reset the router to clear any previous settings from its memory. Default IP Address is http://192.168.1.1 Manuals and firmware is available from the device maker.