Hi from Venezuela, My DSC-S40, is not working good. Its lcd screen hss small blue stains, just like if screen is wet or something. I´m sure that my camera always worked well. But I don´t know what´s happening now. Nevertheless, the photos don´t have troubles, it´s only th lcd screen. Please help me form venezuela. sorry by my english!!!!
Best regards,
emilio
I DON´T KNOW. I DON´T REMEMBER IF THE CAMERA WAS IN CONTACT WITH ANY LIQUID. I JUST CAN THINK IT WAS IN A ROOM WHRE THERE IS A CONDITIONER AIR ....I DON´T KNOW. I DON´T REMEMBER IF THE CAMERA WAS IN CONTACT WITH ANY LIQUID. I JUST CAN THINK IT WAS IN A ROOM WHRE THERE IS A CONDITIONER AIR ....
You can't post conmments that contain an email address.
An expert who has achieved level 2 by getting 100 points
MVP:
An expert that got 5 achievements.
Sergeant:
An expert that has over 500 points.
Champion:
An expert who has answered 200 questions.
Expert
326 Answers
Re:
Hello Emilio,
it seems that your camera was in contact with water or Coca-Cola. In order to repair it you should change light guide plate part number: 147913011 or LCD part number: 180572011 or both.
Best regards,
Arpi
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am not sure about the specific brand. Open the case by removing screws (usually 5-6). The LCD screen is immediately accessible. Lift it carefully and trace the ribbon connector. Lift the small flap in the connector carefully and pull out the ribbon cable. Replace it in the reverse order.
Hi Karen_Earl I can't believe that this advice I found here todayon this site actually worked !! just passing it on. I got the evil white LCD screen today and then found this advice here: turned it off - I smacked the top of the camera afew times and when I turned it back on it worked fine!! who would have thought there was such an easy, instant and cheap solution to what I thought was an expensive or terminal problem! Thanks to Jada 1234 for posting this last year! !
Had the same issue with my wifes camera. Stripes going accross the screen. I figured that there might be a loose connection. I removed the batterys and three small screws (one is under the memory stick). Then I GENTLY removed the back, starting above the battery compartment. With the back exposed, I put the batterys back in and gently started playing with the screen connections. I got the screen working after playing with the lower, larger conection, on the bottom. Figured I had nothing to lose. Hope this helps you out.
Please check the new and old pictures on your PC. If the pictures are OK the problem is in LCD.
Please check the settings that are described in your user manual.
If you need more info please advice.
I DON´T KNOW. I DON´T REMEMBER IF THE CAMERA WAS IN CONTACT WITH ANY LIQUID. I JUST CAN THINK IT WAS IN A ROOM WHRE THERE IS A CONDITIONER AIR ....
×