Upgraded to sevice pack 2, put the canon digital camera solution disk in the disk drive, try to open it and ejects the cd from the disk drive, it wont recognize it
You don't need to use the Canon software.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
SOURCE: Software not being recognized
The software on the CD is slightly outdated. Here is the driver download page for your camera: http://alpha02.c-wss.com/inc/ApplServlet?RQF=MENU&RQS=WWUCA910&LA=1187365946277&SV=WWUCA1351&TRF=MAIN You probably don't need the drivers, but they're there if you do need them. What you do need is "ZoomBrowser EX5.8b Updater for Windows" Although it says it's an updater, you can use it even if you aren't updating anything. This includes CameraWindow, and all the software that would be on your CD.
SOURCE: Canon PowerShot SD600 Digital Camera
Manually rotating sensor rotor inside camera and cleaning gear fixed the Canon "lens error" for me.
I placed instructions with photo's here: http://www.avh.dds.nl/Fix-Canon-SD600-Lens-Error/
SOURCE: Problem installing Cannon SD 1100 software on my Personal Computr
Go here to try to download the software.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=323&modelid=16347
Good luck and please rate
SOURCE: While trying to install Canon Camera software, I'm
Select the "Start" menu in the lower left corner of your computer monitor screen. Select "Control Panel", then double-click on "Display".
Click on the upper "Settings" tab, then move the slider bar to the right, to at least 1024 x 768 pixel. Then hit Apply or OK. This will increase the screen resolution of your computer monitor so that it will be compatible with the Canon software.
SOURCE: Canon Rebel XTi not recognized when plugged into usb
Vista is your problem. Solution...buy an inexpensive card reader to download your pics to a folder you create on your desktop. From there, you can send the pics to your photo editing software.
64 views
Usually answered in minutes!
×