Question about Toshiba CT-90157 Remote Control

2 Answers

CT-90157 Won't work at all ???

I have tried several batteries in it, Didn't help. The volume/ channel change/ power, will not work at all. I have never used the Dvd or Vcr slide button on side, so not sure if they worked. Please help. I can't find my owners manuel either. I would really appreciate it if someone could help me. Not sure if it lost it's code or what.

Posted by Lisa Bartlett on

  • rodrick346 Oct 03, 2008

    I have a similar problem with my Toshiba plasma TV model: 42wp36p. The remote control sometimes works for some few minutes then the TV stops responding. I have also tried with one of those multi system remotes and I have been getting the same problem.

    Actually with what I have gathered I think it could be the TV remote sensor, but not sure how that can just misbehave.



    Please need more advice

×

Ad

2 Answers

Haykey Kaariainen

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 55 Answers

Adding to the advice above. If you have tested your remote and it does not work then you may try to repair it according to my detailed instructions.
http://www.instructables.com/id/Repair-your-remote-controls/

Posted on Dec 01, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

YOUR REMOTE IS A TRANSMITER WHICH TRANSMITS AN INFRA-RED BEAM WHICH CANNOT BE SEEN WITH THE NAKED EYE THEREFORE USE YOU CAMERA PHONE TO TEST IF IT IS TRANSMITING A BEAM POINT REMOTE TO CAMERA PHONE AND PRESS ANY BUTTON ON THE REMOTE. YOU SHOULD BE ABLE TO SEE THE INFRA-RED BEAM FLASHING ON THE SCREEN OF THE CAMERA PHONE. IF THERE IS A BEAM IT MEANS YOUR DEVICE THAT CAME WITH YOUR REMOTE IS FAULTY. IF THERE IS NO BEAM YOUR REMOTE IS DEFINETLY FAULTY. IF YOU FIND THAT YOUR REMOTE IS TRULY FAULTY USING THE PROCESS MENTIONED ABOVE THE POSSIBLE PARTS TO REPLACE WITHIN THE REMOTE WILL BE THE L.E.D, QUARTZ455MHZ PS PLEASE CHECK YOUR BATTERIES AGAIN.

Posted on Jul 14, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get any sound from my ct-9906 remote


First sound doesn't come from the remote! HA! HA! LOL HA! HA! No try rolling the batteries around in the back of the remote. Have you changed batteries recently.

Aug 11, 2013 | Toshiba CT-90157 Remote Control

1 Answer

My buttonson my tv arec all volume and my channel is stuck on a setting and i cant get any channels.will a vcr fix the problem? will it put my tv back to hdmi?


If using cable you may be able to route signal to rear audio and video inputs--doubt a vcr will help.

disconnect power from set and or a box if used--wait several minutes and power up again--HDMI can cause issues and does not like connections being made if units are on.

Dec 03, 2012 | Televison & Video

1 Answer

Won''t turn on the tv also cannot change the settings manually on the tv


Thanks for stopping by.

What is the model number and manufacturer of the TV you are trying to control with the CT-90157 remote?

Not all IR codes are programmed into all remotes.

Sep 26, 2011 | Toshiba CT-90157 Remote Control

1 Answer

Hello. I have a model # URC-4640Boo and am trying to set it up to work an a Sony dvd-vcr combo model # SLV-D300P and can't seem to find out how. Can you help me?


Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page



Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.


Thanx

Jul 17, 2010 | One For All URC-4605 Remote Control

1 Answer

Toshiba remote stopped working


remotes run on infra red technology. that part of the remote could be damaged. if this is the case its just cheaper to get another remote. just remember if you get a universal one .. you keep the code book.

Apr 28, 2009 | Televison & Video

1 Answer

Took toshiba off comcast control and now ct-90157 won't work


We found the manual at home and was able to program the t.v. to recognize all the channels from cable and store them.

Jan 26, 2009 | Toshiba CT-90157 Remote Control

1 Answer

Magnavox 2205 DVD/VCR Output Channel Control


1: set tv to channel you want your vcr output to be on. 2: turn vcr on (if it is a vcr/dvd combo make sure it is on vcr) 3: put in video tape. 4: press play button one time, release it, and then press and hold it for three to five seconds. i had to call customer support to figure this out on mine.

Jan 17, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Can't go above Channel 20 when input on Video.


I was told by Sanyo and Toshiba that I will have to have a Sanyo remote in order to change the tuner from TV to CATV which he said is causing me to be unable to get above a certain channel and also to change the settings in order to use the Progressive scan cables, so I have emailed a remote finder site and they are trying to find a Sanyo remote for me.

Nov 06, 2008 | Sanyo DVW-7100A DVD Player/VCR

Not finding what you are looking for?
Toshiba CT-90157 Remote Control Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76534 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...