I have fitted a new lamp but the projector is not coming on

Make sure the cable is is good.

lamp USD70

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

One the 3 lcd's has gone bad...replace the lcd.
Art

that model has a history of bad ballasts. you'll need to replace it.

there is a short in the projector somewhere. but that model has an issue with the power supply and there is no replacement parts available.

are the leds on the top lit or blinking? it could be the lamp, the ballast, or the fans. check the lamp. if there are black spots or bulges in the lamp, replace it. if not, make sure the fans are running. if they are, replace the ballast.

the problem could be related to a fan or heat sensor. The lamp could be faulty but new lamps tend to be pretty good as far as reliability. Just make sure the lamp is sititng absoultely firmly in the correct position...normally you would plug in and switch on. Regards Kevin Andreassend http://www.iceav.co.nz [email protected]

your projector must be inspected by qualified service technician to fix the real problem because electrical arcing maybe differnt things.

These instructions are taken from page 44 of the User Guide.

Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.

Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".

Lamp time will be initialized

You won´t find a solution in the manual. You may ask LG for technical support. Bj?rn