What part of the question is unclear: no parts list in manual???
Go to this link for parts for fantom fm740
http://www.vacpartswarehouse.com/Fantom-FM740-Bagless-Upright-s/4164.htm
SOURCE: Where can I get a
if in Australia call godfreys vacumm they can probably email one to you or look up www.bissel.com and ask them
SOURCE: Fantom Cyclone XT Vacuum Cleaner
FANTOM FURY VACUUM MOTOR CONNECTIONS. I REMOVED MOTOR TO CLEAN DEBRES FROM BLOWER.IT RUNS BUT SEEMS TOO LABOR.I MAY HAVE RECONNECTED WRONG
SOURCE: I need a user manual for the VCU007 upright vacuum
Hi, i have a user guide which i am happy to photocopy for you and post...would this help ?
SOURCE: Broken Belt for Fantom Crosswind 600XL
Hello, your Fantom vacuum will take a Panasonic U vac belt, to replace it, their are two screws in the back, one on each side of the back of the housing, take out the two screws and lift off the top hood, and the vac belt is on the side, remove the brush roller clean any debis away, put the new belt around the metal motor shaft first then around the brush roller, and pull down into the housing, make sure it locks in evenly, then turn the roller to make sure it moves freely. then put the hood back on front first, hold down and put the screws back in, in the back. now your ready to vacuum. Any question or more help I can give, please call 1561-848-3387 Thank you, Teresa.
271 views
Usually answered in minutes!
×