Buttons not working

Check the tape monitor button.

You can try one of these;

1. Hold down "Energy Saving" and "Lighting" buttons simultaneously for 10 seconds (or top left & right buttons). Display panel returns immediately

2. press the Freezer and Ref buttons at the same time for 8 secs and Bam!!!! Bac 2 normal!

3. pressed the power freeze and vacation buttons for about 3 secs and it worked

4. I held the top left and top right soft touch buttons on the screen itself (which I think is the power save and the lighting buttons) and held for about 8 - 10 secs and it reset

Hope it helps. Its in the combination of two buttons pressed simultaneously. Try your luck.

I HAVE THE SOLUTION!!!! My 52" was doing the same thing. It would work and then picture will go to snow and no inputs worked, the remote didn't even work! I would have to power everything down (Reciever, PS3, etc.) then it would work but no telling how long. Even touching the TV where the buttons are made it go to snow!! THIS IS WHAT YOU DO. Take the back cover off. Where the side buttons are, there is a board in there and it is touching the metal frame. Take something like a credit card and cut it enough so that it will not be sticking out, get some electrical tape and anchor the card to the metal frame so it will not fall out of place. You're basically protecting the board from touching the frame!! Put the back side back on and screw in place and your all set. My TV has been working perfectly ever since.

I had a similar problem: unresponsive buttons, then the 1 hour wash button led was on but the other buttons weren't working at all.
I power off for more than 30 seconds and after that everything return to normal.
Thank you for the hint!

I think you're in luck. There is a recall for the master switch due to this very issue. Act like you don't know what's wrong, they'll need to replace it to an updated one that won't be so prone to water infiltration.

Look, enV2s **** ****. almost everyone at my school thats had one, the front buttons quit working... even mine and i only dropped it once. its just a bad phone when it comes to front buttons.

After several power ups, the front panel buttons eventually "woke up". Replaced remote, and everything's working fine. Not sure why the front panel was temporarily unresponsive.

No solution but mine did the same thing yesterday for the first time, however I didn't drop mine. Like you, the only button that works is the power button. So frustrating!

Have you tried updating the firmware of your Zen V Plus? I've had mine for almost an year and haven't had these issues -- I updated the firmware as soon as I unpacked it.

try downloading the MP3 player recovery tool from Creative's website (the tool contains the latest firmware update available -- 1.15.03). Plug your ZV+ into your PC, run the program and let it update the firmware. Then format, reload your music and try it.

By the way, before updating the firmware, let the battery have a full charge, ok?

I am having the exact same problem today and I paired mine with a Treo Palm 700 on yesterday and it worked perfectly then. UGH!