Question about Fujitsu M3041D Printer
Having problems with the Fujitus M3041D with a print band Error Can anyone please tell me where to start looking. Darrel Rivtech Tumut Australia
Ensure that the printer cables are properly connected. If in doubt, turn off the printer, unplug it and disconnect all of the printer cables. Plug it back in and reconnect the cables. Turn the printer back on again to see if the error has cleared.
Check the printer cartridges and printheads to ensure that they're installed properly. Also see if the printer cartridges are empty. If the ink cartridges have sufficient ink, reinstall the cartridges and the printheads. If an ink cartridges is empty, replace it with a new one.
Make sure that the printer's software is properly installed. If the device does not respond when you try to print or the printer software won't initialize, uninstall and reinstall the printer software.
See if your computer's firewall is preventing the printer from functioning properly. Open your firewall preferences and add the printer software executable file (*.exe) as an exception or disable the firewall temporarily to see if this fixes the error.
Check the print settings in the printer software if the pages don't print properly. Make sure that the margins are set to at least the minimum margins that your printer supports. Also ensure that you've selected the correct printer settings for the paper size and type of document you're trying to print. To access these printer settings more easily, open the Solution Center.
Clean and align the printer cartridges. Open the software for your printer or the Solution Center to access these maintenance features.
Double-click on the printer icon in the systray on the bottom right of the screen, if it appears. Look under "Status" in the printing queue to read the error messages. Right-click on the entries and select "Cancel," if necessary.
Navigate to the website to search on your specific printer model if these steps fail to fix the printer error. Click on "Support and Troubleshooting." Click "Solve a Problem" to find solutions for the printer's specific error. Also check the "Software and Downloads" area for software and driver update.
Posted on Jun 17, 2011
Welcome to Fixya
Try to clean the the parts below that would contribute with the "Ribbon" error message. a) Ribbon path b) Ribbon feed roller c) Ribbon guide and arm d) Ribbon feed sensorThank you for using Fixya!
If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b
Posted on Jun 18, 2011
Tips for a great answer:
Usually answered in minutes!