It came off and don't know where the blue or red cable should be conected of the microphone help me please.
Blue to pin2 red to pin 3
If we're talking about the microphone cable wiring on a low impedance mic remember this. Cheap mic cables with XLR's on both ends often have no standard color code to follow. True pin 1 is ALWAYS ground (shield wire) but the other two wires could be any color of the rainbow. Look for small numbers beside each pin of the XLR connector and make sure that pin two on one end of your cable, is also pin two on the other end as well....etc. Special note: The XLR connectors set screws have reversed threads and it's the same for the XLR male plug in the bottom of the microphone as well.....Glen
Red goes to centre pin, earth to pin 1, and blue to the remaining pin
484 views
Usually answered in minutes!
×