Question about JVC AV-32F704 32" TV

JVC AV-32F704 32" TV Picture is blurry - cannot read any writing on the screen

I have a 3 year old JVC 32" flat screen television Model AV-32F704. I turned the tv on the other night and heard a loud popping and crackling noise. The tv came on and the picture is very blurry. I can see characters on the screen but reading any writing on the screen is almost impossible. It is like looking at something that is constantly out of focus. Any help or suggestions would be greatly appreciated.

1 Answer

Bill Heronemus

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.
Expert
308 Answers

You didn't mention if you saw fine white diagonal lines running through the screen from top to bottom. If so, you likely have a shorted Picture Tube which is not usually fixable. If there are no lines seen running through the screen, then it is possible the High voltage transformer which also has a screen voltage and focus control built in that could be bad. I would expect the cost of that part to be about $100, so the repair cost total could approach that of a new set I would guess.

Posted on Apr 12, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

When tv is turned on it takes 35 minutes for the pitcure to come on, like it is warming up. It is a flat screen digital tv and only 3 years old.

u have to replace apart inside the tv (picture tube base)
which connects picture tube to circuit board,,, call aservice pro...the symptoms are blurry picture & after some time picture gets clear

Apr 02, 2010 | Bush 5693D 24" TV

1 Answer

The picture on the screen in blurry

you might need to see if you can have a tv technician come and clean your mirror and crt guns. and yes universal remote will work fine

Mar 18, 2010 | JVC AV-48P575 48" Rear Projection...

1 Answer

Blurry vision on picture

This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Sep 05, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

No video on my JVC AV-30W475 30" flat screen.

It sounds like you have bad solder connections in the Vertical circuit or the horizontal circuit. The Vertical IC may need to be replaced if resoldering does not help.
You will need to call a good TV Tech for this repair.

Aug 09, 2009 | JVC AV-30W475 30" TV

1 Answer

Red rainbow on top half of screen and double images

ch the stk 392-120 try to set the conv.or try to auto set conv. if work then ok if not work you and stk392-120 or 150 you need a sevice man for that.

Jun 02, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Jvc av-32wf35 Lost The Picture

that is what we call a "frame colapse"
the frame ic on the set can blowin.
did you have any power failuers beforthis happend.

May 11, 2009 | JVC AV-32WF35 TV

1 Answer

I have a JVC tv only 1 year old and the picture is getting dark.

have you tryed adjusting the picture in the menu section! this may help!! or on back of tv is adjusters those may help as well.

Mar 24, 2009 | JVC AV-27920 27" TV

1 Answer

JVC i art 32" flat screen

Does anyone know where can I buy a screen for a 27" LCD Insignia TV. Model is NS-27LCD? My screen creaked. I checked out e-bay and have not found a broken TV with a good screen. Does anyone know where I can buy a screen at.
Thank you all for you time.
JC

Jul 22, 2008 | Televison & Video

1 Answer