I've had this cdr775 for a few years now, and today it refused to turn on. Yes it's pluged in. Does it have a fuse inside and if so, where do I get one. Is it dead? somebody help me out.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like it's the controller for the glow plugs, also, if the first glow plug in line from the controller is bad it will effect all the others. I've had this same sitituation, mine turned out to be the controller.
sounds like you've either got a stiff motor or gunk in the drum making it difficult for the motor to turn. When the fuse blows the drum won't turn at all but as yours is trying to turn then throwing the fault up it sounds like something is causing too much resistance
The main board has an issue which has most likely blown a fuse. Those boards have been discontinued so repairing that one will be at least a couple hundred depending on the shop doing it.Or yo umay be ble to locate a used one on ebay .
Ok without a model number I am going in blind and I hope you do not take that in effect to how you rate me today. Probably cause would be a fuse or a power supply issue. I cannot rule out any further without a model number or additional symptoms.
Thanks and please be considerate and leave a postive rating for your free answer today.
it may be just a fuse , but if the fuse inside the microwave blows again then there is something else wrong and it would need to be tested to find the problem and fix it
so the fuse inside needs to be check and or replaced and if the microwave powers and works ok after replacing the fuse , then the other fuse was just bad
where can i find a power supply bord? [email protected]
won"t turn on
×