- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there might be a power-related part that needs to be upgraded. Please check the table of contents of the manual for errors or troubleshooting section to identify what procedure needs to be followed to get your kenwood working again.
Unplug power cord from the wall outlet, then plug it back IN WHILE HOLDING DOWN THE POWER KEY = only for U.s.a and Canada
For other Countries With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press POWER.
Memory back up function Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 3 days. • Power mode. • Distance setting. • Input selector settings. • Input mode setting. • Picture output. • Midnight mode setting. • Speaker ON/OFF. • PRO LOGIC II mode setting. • Volume level. • Broadcast band. • BASS, TREBLE, INPUT level. • Frequency setting. • Dimmer level. • Preset stations. • MD/TAPE settings. • Tuning mode. • Listen mode setting. • CINEMA EQ ON/OFF. • Speaker settings. • LOUDNESS ON/OFF. • SW RE-MIX ON/OFF. Cautions MODEL PARTS # REMOTE CONTROL # DESTINATION VR-705-SA A70-1612-05 RC-R0626 K1P1 VR-707A A70-1617-05 RC-R0824 K2P2 VR-716A A70-1617-05 RC-R0824 K4P4 REMOTE CONTROL vs MODEL DIFFERENT POINT ACCESSORIES / CAUTIONS Model Service Manual Surround Display Sub VR-705 B51-5840-00 X09-6740-10 - VR-705-SA - X09-6740-11 X25-6600-10 VR-707 B51-5840-00 X09-6750-12 X25-6520-12 VR-707A - X09-6750-14 X25-6610-10 VR-716 B51-5840-00 X09-6750-11 - VR-716A - X09-6750-13 X25-6600-10 Note: A different information will be available from this service manual. Pls refer to original service manual(B51-5840-00), too
you may have a dc condition present on speaker outputs. this could be caused by dry solder joints, suggest blanket resolder of the output stages for front channels.
"Sub-woofer output not working" problem, and notify you when a new solution is offered. Press the setup key on the front of the receiver Select the subw setting Move the multicontrol knob until the sub woofer is on Turn off the receiver and turn back on- the subwoofer should be on The operator manual can be downloaded on the web site--- free http://www.retrevo.com/support/Kenwood-VR-507-Receivers-manual/id/480ag219/t/2/
×