Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Error c-0200 How can I solve C-0200 error code Konica Minolta bizhub C350

Posted by Anonymous on

Ad

1 Answer

bunty jain

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Konica minolta bizhub malfunction detected error code c-0200

Posted on Jul 05, 2013

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: konica minolta bizhub 350

• The Fusing Roller Sub Thermistor does not
detect the required temperature within 30 sec.
after a warm-up cycle has begun; therefore, the
copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period
of time has elapsed during a warm-up cycle.
1
Check that the H1[ fuser lamp] comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
2
Check that the H2 comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
3
Check the installation of the TH1 and the TH2, and
correct or clean as necessary.
- -
4
Check the operation of the TH1.
Remove CN80 (4P), and then check that the resistance
across CN80-2 and -3 on the Thermistor is
infinity.
- -
5
Check the operation of the TH2.
Remove CN81 (4P), and then check that the resistance
across CN81-2 and -3 on the Thermistor is
infinity.
- -
6
Check the continuity of the H1.
Correct or replace as necessary.
- -
7
Check the continuity of the H2.
Correct or replace as necessary.
- -
8 Change PU1 - -
9 Change PWB-A

Posted on Nov 19, 2007

Ad

Anonymous

  • 589 Answers

SOURCE: copier malfunction

Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?

Posted on Feb 10, 2008

steven brickhouse

  • 19 Answers

SOURCE: bizhub 350 error code

c3852 means low fuser(hot section) temp setting. hold down utility or stop key, then you should be abel to do trouble reset. if problem persist it would most likely be a lamp or a sensor, which will require a technician to come out.

Posted on Apr 16, 2008

Anonymous

  • 5 Answers

SOURCE: error code c0520 konica minolta c350

How to clear a fuser error code (C0500, C0501, C0510, C0511, C0520, C0521).Solution To clear the fuser error code, perform the following after correcting the cause:
1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool.
2. Insert a suitable object into the hole to actuate the reset switch .3. The code should clear and a message to close the front door should appear.

Posted on Feb 19, 2010

xeerie

Zaheer Ahmed

  • 347 Answers

SOURCE: REMEDY TO SOLVING ERRORS COF32 AND CO650 IN KONICA

to remove code "COF32" from your machine, simply change the developer with the new one. code will remove.
wish you best of luck............

Posted on Jun 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I ave problem on c350 error code 2160


BIZHUB C350 SHOWING ERROR CODE C-0900 AND
NOW C-0950

Sep 30, 2013 | Konica Minolta Bizhub C350 Digital Copier,...

1 Answer

Error code list


ARE YOU SURE ITS A BIZHUB 350 AND CODE C-0200
NOT IN BOOK
BUT 0202 THUR 0210 ARE PAPER LIFT ERRORS OR
Elevator Failure FOR THE PAPER TRAYS OTHER COPIERS ITS A HV PROBLEM

Jul 05, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

3 Answers

Konica minolta bizhub c350 error codes c-0510


eror code c-0098 meaning ??????????????pls tell me the solution

Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...

3 Answers

Konica Minolta Bizhub c350 error code c-0510. What is it? How do I fix it?


C0510 Upper fusing roller abnormally low temp


replace the thermistor in the fuser

Sep 25, 2008 | Office Equipment & Supplies

1 Answer

Copier malfunction


Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?

Feb 10, 2008 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Erroe code


You post a wrong printer nr, you must have bizhub C350 not bizhub 350, beacause 350 doesnt have that kind of code.
In Bizhub C350 that code means:
C12C0: Hard disk recognition error
You have the following options:
- reinstall the hard disk
- change hard disk
or as a last chance change PWB-MFP

good luck

Feb 06, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...