Programing Dish Network Remote to control a Vizio Tv.

There is no setup codes for Vizio TV with Dish Remote control.

gaschmidts,

I was unable to find any codes for an Etec TV in our system. I would recommend doing a power scan which I have listed below to see if you can scan the code in.

Power Scan to TV:

1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press and release the red power button, then press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off.
3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Tommy Faust
DISH Network

Hey perlhoff,I see you need the remote codes for your Vizio TV. The codes are; 627, 505,506, 006, 527, 625, 110, 775, 756, 885, 864, 758, 111, 112 and 000. I will senda link to help with steps to do the Power Scan, http://www.dishnetwork.com/SupportSection/power-scan-instructions.

Hello, Daniel Busa with Dish Network's customer service try these steps if the remote will program this will do it

Hello Daniel Busa with Dish Network customer service here. Vizio tv's almost always program to 505 so try this code first. To program this hold the clear tv button down for about 4 seconds the other mode buttons will light up. Once they are all lit hit 505 and pound. If that doesn't take care of it use this link:http://www.dishnetwork.com/SupportSection/remote-setup

Hello, Matt Gonzales with DISH Network here. The codes to program a 3.0 remote to a Vizio tv are 505, 627 and 671. If you do not have a 3.0 remote, or the codes provided did not work, you can find a full working list at http://tech.dishnetwork.com/departmental_content/techportal/index.shtml. Hope this helps.

We're sorry to hear about Vizio TV remote, but we would be happy to help you with getting your DISH Networkremote to control your TV. We're going to start by pressing and holding the TVbutton located on the top of your remote until all mode button back lights comeon, and then release. Use the number buttons to enter the codes for your Vizio TV; here some of the codes we currently have: 505, 598, 627, 520, and 766. Press the pound (#) button. To check that the code works try severaldifferent functions on the remote to make sure it will properly operate the TV.Remember that some codes may not be compatible with your equipment. If this isthe case, try the other codes listed for that device until you find one that iscompatible with your equipment.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

We're happy to help you with getting your DISH Network remote addressed to your TV. We're going to start by pressing and holding the TV button on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Vizio TV; here are some of the codes we currently have: 505, 598, 627, 520, and 627. Press the pound (#) button to save the code in your remote. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Vizio TV until you find one that is compatible with it.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

try these

i have dish network different brand tv but have codes for hitachi they are 1004,1006,1012,1013,1059,1060,1063,1135,1136,1145,1148,1179,1185. hope one of these helps