Continous restarting with white screen

If the computer is restarting continously at the windows loading screen then you have a windows issue of which your computer is "Blue Screening" and restarting. In this case you arent really seeing the blue screen as windows restarts immediately as the error occurs. My advice to you is to press F8 before the windows loading screen and choose to "not restart automatically on error" that is not entirely what it says but its to that regard. If that doesnt work try pressing the "Pause Break button continously until the blue screen appears, read the error and google it to find out what is causing the error and go from there. Please feel free to get back to me on this if my information doesnt help or i need to explain further.

It is a pain.
Try the following. Re-run install, insert CD and it should start to load?

The exception is it should come up and say do you wish to uninstall Blah blah . Click Yes. When finished it will want to restart.

Before restart, remove usb webcam. restart.
Go to my poota/programs/and look for the camera file/ it may have been removed in that no problem/ if file is still there/right click/remove. Restart.
Complete restart/then setup CD Webcam again. Sit with it click Ok when asked even not a recognized prog, still click continue.
After completion. Reinsert usb of webcam! wait till it loads, asking silly Q, continue. till finish.
If sucessful, find it in programs if you didn't click for desktop icon?
Startup screen should show small white screen, couple of Q's it can't do something, ignore. You will end up with blank white/black square.
Click menu at top, click devices, dropdown click your cam name, should then open to a larger screen. If you need to alter things, click options.
All this of course if it loads.

Best of British.

it may be rite wat u r suspecting...........other problems can be like software problem which u will have to flash via connectin to a system........ or very least possible is that it might be your display problem also...........which u can easily get repaired

'How two active the line two to line one'

I had this problem a few months ago, what is wrong is, you have a bad driver, something that you can do is switch the USB mode, this should work. If you have tried to the driver and switch the USB mode and it still doesn't work, then let me know.

Good Luck,

Fixer Guy

you must restart your device. to restart hold in the power button for a feew minutes until it restarts. good luck! please rate! =]

modelo e200r videos

this problem may due to virus , so better you reinstall your system

switch the cord into a different usb slot while it was loading

try and see if it is in MY COMPUTER if it is there download the newest firmware and update it if that doesn't work uninstall the mp3 player from your computer and then installit again.