Recieving no signal error - Proview HV-177 17 in. HD-Ready LCD Television

do u have a good sim card that is activated and on signal does not mean it will work

T&R ERROR MEANS TRANSMITION AND RECIEVING ERROR.
MEANS YOUR PULSAR BOARD IS NOT RECIEVING SIGNAL.
IF YOU WANT TO GET REPAIR. SEND IT TO ME.ICON SOL.
email [email protected]

First Option:
Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved So
Secend Option:
Your Phone Network IC Fault So Please change Network IC
And Network Signal Problem will Solved
if it is there isn't much you can do on this side of the network.
Contact your phone company.

Tvs on mobile phones require settings about the location before they can recieve any signal. Review the tv settings on your phone and select your location. If problem persists, get in touch with me again. Thank you.

Hello,
This is another Sony KDL 40S4100
is only recieve NTSC signal, is there is any firmware or anyway that I can make it recieve PAL signal??? Anybody out there?

contact u service provider they will provide u with the settings u need .it will be LNB and frequency settings

before receiving or sending picture messagers u must activate the MMS settings by requesting ur network provider only then u can send or receive picture msg 
if u hav a signal problem nothing can be done
a small suggetion is in stores they sell a external antenna try getting it and fix it 
tat helps in signal problem

The HDMI inputs are pass through inputs only. The reciever cannot recieve any sound signals through the HDMI's. The reciever acts as a selector switch for the HDMI inputs only. Whatever input you have selected on the reciever is the one that is being sent through the output to your TV. The "unlock" display shows when there is no sound signal sent to the reciever. There is no code to unlock. This is the reciever's way of telling you that there is no sound being sent to it from that input. Since there is no sound being processed from the HDMI's, you need to hook up an additional audio cable from the device to the reciever (preferrably an optical cable). When the reciever recieves an audio signal, it will then "unlock". I know it is confusing. I had to look into this problem myself, so I'm happy to help. Higher end recievers will actually recieve and process sound signals from the HDMI's. When I bought this one I thought it was going to do the same. That's what I got for trying to save a couple bucks on the cheeper model! Although it is still a good reciever.

that maybe the case..you could put a shielded barrier(copper coated poly) between them.sounds like it's a little too sensitive