Question about Olympus Stylus 710 Digital Camera
Hello, This is my first digital camera and I have been having fun with it. I love taking pictures and then playing them on my TV. Today, I turned my camera on and saw the picture on the camera screen but when I plugged the AV cable into the camera the camera screen went black? I even tried plugging the AV cable into the camera and then the TV and then turning them on but the camera screen is still black. I am not sure what is wrong and the camera is new. I appreciate any help or advice. Thanks
Did you fully charge the battery before use when you bought the camera? and is it charged now? most cameras can take photos but not be able to hook up to download. because photos take less energy it may be that it has just enough energy to take a picture, but not quite enough to do anything else. i don't think your stupid, its just that some people don't think of the little things as be possible. also could check to see if there is any obstructions. (dirt, little pieces of plastic, etc.) on the main routing items. (memory card, plug-both ends, inside the camera housing itself). hope i could help GOOD LUCK!
Posted on Sep 15, 2007
Audio and Video Front Inputs are available
for a quick connection of a VCR, to playback
video from a camera or attach a gaming
device. Use the AV button on the remote control
to tune these inputs.
1 Connect the video (yellow) cable
from the Video output on the Camera
(or accessory device) to the Video (yellow)
Input located on the FRONT of
the TV.
2 For Stereo Devices: Connect the audio
cable (red and white) from the Audio
Left and Right Outputs on the Camera
to a Stereo to Mono adapter. Then plug
the single end of the adapter to the
Audio In (white) jack on the FRONT
of the television.
For Mono Devices: Connect one end
of the audio cable from the Audio Out
jack on the device to the Audio In
(white) jack on the FRONT of the television
3 Turn the TV and the accessory device
ON.
4 Press the AV button on the remote
control to tune the TV to the side input
jacks. "Front" will appear on the TV
screen.
5 Press the PLAY button on the
accessory device to view playback, or
to access the accessory device (camera,
gaming unit, etc.).
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, or Front input
jacks.
Note: The Audio/Video cables needed for
this connection are not supplied with your
TV. Please contact your dealer or Philips at
800-531-0039 for information about purchasing
the needed cables
OK
84 views
Usually answered in minutes!
×