Fuji S5700 Replacement LCD

try to playback previous images ..If screen looks good on playback and or main menu..Camera likely has problem with CCD imager and camer digital processor board.If camera also looks bad on playback and menu..its possible the LCD IS BAD..easy test is to hook up camera on a monitor or computer and see what picture on camera mode looks like..If it also looks bad on a different monitor..Then CCD imager could be bad..If playback and camera mode lokk bad on monitor ..then you have a video process board problem ...please let me know

Unfortunately this is not a user repairable problem. Either you LCD screen is failing or the ribbon cable connection is not good. Both are not repairable by the consumer.

Holding down the Back button while turning the camera on will display the firmwareversion.

HI, this is isolated within the LCD screen. the input ribbon may be defective or, the entire screen could also be damaged. you will have to replace the lcd screen in this case due to the integrated design. you can confirm my diagnosis by, pulling the battery or plug for 5 minutes. if this screen is still not operating normally after you re insert the battery, this will confirm LCD screen failure.

http://www.partmaster.co.uk/cgi-bin/home.pl there are a lot of spare parts here at this site...

You Can not put additional flash on S5600, S5700 and S5800.

These sites might help ...
http://www.thefotogeeks.com/lcd_repair.htm

http://www.darntoothysam.com/servlet/the-Digital-Camera-Repair-Service/Categories

sure :
http://www.fujifilm.com/products/digital/download/01/index.html