Hi when i try to play a video game the screen goes black

if evrything is ok with the dvd (make sure the dvd is working fine), you need to hook up the yellow/ blue wires and yellow / black wires one for parking breack and the other for the breack chek the diagram on top of the alpine radio .

Sounds like a bad laser, but you should restore the PS3 back to Factory to see what happens.

If you get the same results it's definitely the laser.

u need to switch function screen to dvd screen. Button is on front of unit to scroll through screens.

make sure you got the right drivers for your unit... specially if your using operating systems that exactly supports that drivers you 've loaded with...

Go to HP's website and search the model number of your PC. You will see options for downloading the drivers for it.

try changing the dvd drive speed in the system configuration, it may be at standard, change it to fast

Have you try installing the driver for your pc?

the sound driver and the
DVD software need to be installed

Combo DVD/VCR players don't output the VHS with Component Video. Most of the time, it won't output over the S-Video either. The high end outputs are ONLY for DVD output. You must run a yellow wire, or use coax cable to get the video. Same goes for the optical digital sound out. It's only for DVD use.

hi there,

try to check if your using pal or ntsc...try adjusting the video output and you'll probably get the picture eventually.

hope this helps.

fixya!

Hi There is an I/P button on your player's remote control. Power your player on then press the I/P button on your remote control.