I dont have instruction manual for kenwood tk-460

Try WWW.MODS.DK They have manuals for all sorts of radio's. You don't have to register if you only want one or two downloads from them.

Here's the manual:

https://www.manualslib.com/products/Kenwood-Tk-380-259920.html

and some other info:

https://forums.radioreference.com/kenwood-ef-johnson-forum/289802-kenwood-tk-380-programming-help-questions.html

Check the link below:

http://www.flash-services.com/upload/userguide-kenwood-tk2140-3140.pdf

Have a good one!

I wasn't able to find a manual, but was able to find programming instructions online. I hope this helps!

http://blog.savel.org/2006/11/16/kenwood-tk-248/

the manual from the manufacturer is pretty much useless. every time i wanted to do something with mine all the manual said was "see a sales rep or dealer!" i have the software (windows version) that has a pretty good help file in it. you may want to check out the yahoo boards for kenwood.

Here is a link to the Kenwood TK3101 Manual which explains how to program this radio.

http://www.hitechwireless.com/pdf/Kenwood/TK3101-manual.pdf

If you need custom programming please contact us.

HiTech Wireless 888.511.5162

http://safemanuals.com/ pleace rate me let me know if this helped.

Hi,

It wold seem that you have two (2) concerns:

• user's manual;
• battery charging - pls check output voltage of adapter/charger; pls check battery terminals.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

broken wire on the mike line or bad mike element.

Hello!! First of all, any radio in the right frequency will work with any other, to work just need the following features: -Frequency, 154.700 which is correct as you said. - the Squelch code, this could be PL or DPL. The XV2100 has a table of codes that you can try, as you dont know this code form the Kenwood, you will need to check one by one. If you have the chance to send the Kenwood to some to "Read" the radio parameters( freq.,Code, ETc) you can look those parameters on the XV. Hope this can help, any comments [email protected] Good Luck