Fuzzy and discolored picture

backlight inverter or tcon board

If the Green appears to be " Glowing" around objects and the color tints are all wrong then its most likely a CRT coolant issue. If the picture appears as 3D with a possible arc in the screen then you can assume its a convergence issue.

Dull Video...

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

Convergence

* Screen Looks 3D, Warped, Distorted, etc
* Colors do not line up
* TV may shut off - and make a chirping sound.


You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

unfortunately cable does not give you the best quality picture and "fuzziness ' is the reduced resolution being displayed on the tv.
the easy way to check the picture quality is to get a decent hd antenna and scan using it for free hdtv signals, if these are also fuzzy, on all channels then the tv has a problem but if it is only on a few lower resolution channels then its just the way it is until everyone is hd 720 or better.

My picture is fuzzy now too, but it still turns on ...

well you should check the settings and read menual

Hi,
The TVs produce picture using entirely different methods. Usually the colors and especially level of black color are better on plasma, LCD will have some trouble various shades of gray and black especially shading on peoples faces etc.. This is not a defect in the LCD just a limitation in current technology.

BY FUZZY IF YOU MEAN STILL HAS COLORS OUT OF ALIGNMENT THEN THE STKS NEED TO BE REPLACED ALONG WITH ONE OR MORE RESISTORS.

ok, resolder the video chroma section and the high voltage section, include also the audio section, if there is any change pls notify me so that I know what will going to do.

• your problem is due to crt getting weak
• because of that you are getting fuzzy picture.
• good luck.