I purchased a brand new P113 Ryobi charger about 2 years ago. It has never worked. If I put a P104 battery in for a charge, it looks like it works correctly. I push the battery tester on the battery itself, and it says full charge, but when I go to use the bateery, it dies right away. I have tried three new P104 batteries. The batteries charge on my charger at work with no problem. The funny thing is, I don't need a battery in the charger and the charger does the same thing, It runs the test, shows it is charging, and then shows that there is a full charge. All without even having a battery in it.

WHY SHOULD WE BUY ANOTHER CHARGER IF THIS LOOKS LIKE A MANUFACTURING PROBLEM..I THINK RYOBY SHOULD REPLACE THIS DEFECTIVE P113 FOR A P117 FOR FREE I BOUGHT MINE VIA EBAY, AND IT'S DIFFICULT TO REFUND AND SHIP THE CHARGER BACK TO THE PERSON WHO SOLD ME THIS CHARGER VIA EBAY....PLEASE RYOBY COMPANY HELP US OUT WITH THIS ISSUE...I WOULD LIKE TO KNOW HOW TO CONNECT WUTH THE RYOBY COMPANY AFTER SALES SUPPORT DEPARTMENT TO GET THIS ISSUE SOLEVED... WHY SHOULD WE BUY ANOTHER CHARGER IF THIS LOOKS LIKE A MANUFACTURING PROBLEM..I THINK RYOBY SHOULD REPLACE THIS DEFECTIVE P113 FOR A P117 FOR FREE I BOUGHT MINE VIA EBAY, AND IT'S DIFFICULT TO REFUND AND SHIP THE CHARGER BACK TO THE PERSON WHO SOLD ME THIS CHARGER VIA EBAY....PLEASE RYOBY COMPANY HELP US OUT WITH THIS ISSUE...I WOULD LIKE TO KNOW HOW TO CONNECT WUTH THE RYOBY COMPANY AFTER SALES SUPPORT DEPARTMENT TO GET THIS ISSUE SOLEVED...

After making contact with "BAD After Sales-Service" Ryobi is providing on WARRANTY issues,Idecided to use my Elctronic skills and got the problem..R5 (4.3Mohm 1/4 WATT))was open. so I replaced both R5and R6 4.3Mohm 1/4 WATT for the same value but using 1 WATT resitors instead of 1/4 WATT resisitors...that's all folks!....One thing i can assure you my community -friends.....I'll NEVER buy a Ryobi product!..their Warranty-service department is the WORST ONE I had dealed with..NO MORE RYOBY PRODUCTS IN MY LIFE....Best regards my friends. After making contact with "BAD After Sales-Service" Ryobi is providing on WARRANTY issues,Idecided to use my Elctronic skills and got the problem..R5 (4.3Mohm 1/4 WATT))was open. so I replaced both R5and R6 4.3Mohm 1/4 WATT for the same value but using 1 WATT resitors instead of 1/4 WATT resisitors...that's all folks!....One thing i can assure you my community -friends.....I'll NEVER buy a Ryobi product!..their Warranty-service department is the WORST ONE I had dealed with..NO MORE RYOBY PRODUCTS IN MY LIFE....Best regards my friends.