Question about Kohler Plumbing
Water pressure suddenly decreased but when the sprayer is removed it is fine. There seems to be something slowing the pressure down in the sprayer handle but i can't see how to take it apart
Posted on Aug 27, 2012
My best guess is the supply valve for the hot side isn't open all the way. This valve is right on the valve and is accessed by taking off the front cover plate. This would still allow the pressure balancing valve to let water through but then you would have a small flow on the hot side.
If this isn't it then then cartridge is bad.
Please rate this response and good Luck,, phil
Posted on Dec 31, 2008
Ihad the same problem. It is not the screen. What you need to do is get a spray diverter the old one disintergated and is blocking the flow. You have to take the collar off and underneath is the diverter. This is after you take the ball and rings out.
Posted on Feb 17, 2009
Try draining the system and apply air pressure (min 30psi) to each faucet. Open other hot water faucets to allow pressure to vent. Next try draining and cleaning the hot water tank.
Posted on Oct 24, 2009
When you remove the screw, you will have to give the handle a slight pull to take it out. Sometimes it is stuck after being used too long.
Posted on Aug 10, 2010
Tips for a great answer:
Aug 25, 2013 | Jado 803800355 Basil Single-Handle...
Feb 08, 2013 | Hansgrohe Plumbing
Aug 17, 2012 | KitchenAid Architect KBFA25ERSS Stainless...
Aug 19, 2010 | LG LDF6810ST Stainless Steel Built-in...
Jun 02, 2010 | Dishwashers
Jan 29, 2010 | Blanco Classic Single Handle Faucet with...
Mar 27, 2009 | Solo Backpack Sprayer
1,554 people viewed this question
Usually answered in minutes!