I have a tview 1006 And the guy that installed it said to use station 90.5 fm. worked great in his shop. get on the road out of town and it does not work so good. Hit a town that has a 90.5 station and now I get nothing. cant find another station that it works on. even when it was working it was filled w static. Any suggestions. Cant get any help from the person that installed it, he says look at your manual but it does not address this problem. thanks, Scotty
SOURCE: no picture on tview dvd70ts
This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally
68 views
Usually answered in minutes!
×