Fisher & Paykel Smart Drive 053
I have has few problems with this washing machine, Last year I replaced the water switcth (its the first thing in machine phyical controls of water).
This week it just stopped after doing 4 loads. This week I tried it again and it did a load in the morning and one in the afternoon. The following one just cried fowl.
The lights went to the following lights and did nothing....
WASH PROGRESS 3(No.3 - green light)
WASH TEMP Warm
WATER LEVEL Low
SPIN SPEED Med
Does anyone know what this is??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Either the cold water inlet solenoid has failed or there is a fault with the electronic control module, Unfortunately the only way to find out is to replace the cold water solenoid and see if it works, if it doesn't then the electronic control board is faulty.
First thing to check is the screens not only on your inlet hoses but also on your mixing valve on the back of your machine. Just a few blockages the size of a few grains of sand can foul the system. Also under your machine check out your water pump and diverter valve for damage and proper operation.
Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse on it's overload, A common thing in Aqua-Smart Machines i always keep seeing,
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.
You have a control board problem that I would never advise replacing on this brand.The amount of headaches I see in my customers who own this can right a book.Sorry my friend.
I have the same issue. I know it's going to be something stupid but I can't tell until I get the error codes from a manual. Can anyone help?
×