Question about Kenwood KDC-MP732 CD Player

1 Answer

Cant turn off the demo mode

I just purchased this radio for my truck and it works fine. I just can't seem to be able to get the "demo mode" turned off. There are instructions in the booklet but it doesn't seem to work. I can't even get to the demo mode option to turn the thing off. HELP!!

Posted by DeVere Walker on

  • 1 more comment 
  • Ganso Dec 11, 2007

    The radio works fine but I cannot get Demo Mode off. The manual says to hold down the control know but I tried that and it still won't go off. Help please!

  • Anonymous Nov 15, 2008

    kenwood kdc mp235 same thing going on this did not work

  • Anonymous Mar 15, 2014

    only remote control works, seems to be stuck in demo mode

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Posted on May 07, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a jvc 528 and its buttons or nobbs want work on it


It seems the radio is on demo mode. Press the source button continuously till the radio comes to ''on''. If that does not work press the control button continuously.. JVC 0910DTSMDTJEIN Instruction Manual Basic Operations

Nov 20, 2016 | JVC Car Audio & Video

1 Answer

DEMO MODE STAYING ON


You should rewire it, if i remember correctly yellow wire should be connected to constant + (or directly to battery +) so the radio doesn't lose any settings when you turn it off

Jan 17, 2018 | Kenwood KDC-352U

1 Answer

On my pioneer p6500 it is stuck on demo mode how do I turn this off so my radio will work


You should still be able to turn the radio on even if it is in demo mode. If you can''t turn the radio on, you have other problems. Did you try pressing the source button? Most pioneer radios tell you how to turn demo mode off when you first put power to it.

Apr 12, 2012 | Pioneer Car Audio & Video

1 Answer

HOW TO TURN OFF DEMO MODE j v c indash radio model KDS 16


Turn the unit on. Hold the SEL button until "DEMO ON" shows on the display. Turn the knob to select "DEMO OFF" and press SEL.

The above instructions are also from the first page of the manual.

Jan 06, 2012 | Kenwood Car Audio & Video

1 Answer

I got a kenwood kdc-x491 from a local pawn shop. it works fine but its staying on demo mode. how can i turn it on to a regular use mode?


use source boton to put the radio on standby, press and hold setup boton, and you will see a hide menu. and find demo mode and turn it off.

Oct 02, 2010 | Kenwood KDC-MP435U CD Player

1 Answer

JVC KD-G322 Demo mode


Hold down the "SEL" button, and use the CD track skip button to scroll to where the display says "DEMO," and use the volume knob to change the setting to "OFF." Push SEL again and you're good to go.

Apr 03, 2008 | Kenwood KVT-617DVD Car DVD Player

2 Answers

Demo mode Kenwood KDC-237


To turn off the demo you need to press the src button to put it in standby mode. Then press the menu button as if to change the settings and use the joystick to scroll right until you see demo, then turn it to off....

Do as above to allow you to enter AUX mode this will let you plug in your MP3 player to the input on the face and hear music through it ;)


hope this helps you

philzee

Mar 18, 2008 | Car Audio & Video

Not finding what you are looking for?
Kenwood KDC-MP732 CD Player Logo

Related Topics:

2,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76511 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...