i still need them, and the setup program especially, i think it uses standard lpr once configured.. email at inventor_007 at yahoo.. thanks in advance..i still need them, and the setup program especially, i think it uses standard lpr once configured.. email at inventor_007 at yahoo.. thanks in advance..
AnonymousJan 23, 2008
I need a Manual for the Extended Systems ESI-2831 Pocket Print ServerI need a Manual for the Extended Systems ESI-2831 Pocket Print Server
You can't post conmments that contain an email address.
i have the drivers if you still need them it runs on a program it is internal on the unit you connect to it and configure it so get a hold of me if you need iti have the drivers if you still need them it runs on a program it is internal on the unit you connect to it and configure it so get a hold of me if you need it
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the IP Address of the 2833. I believe there is a gray button you can depress to print out a configuration sheet. If the wireless modem was also your router, you may have a different IP address range and will need to set the 2833 accordingly.
Most Print Servers are by default on DHCP and if the PS is still on its factory defaults, it won't get an IP address because your computer won't have a DHCP server (unless u have set up one).
Now, you can ask the person you got it from if he had ever assigned a static IP Address to the PS.
Also, one of the reasons why your laptop won't detect the PS might be a software firewall installed.
Please revert back with any other questions or observations.
good luck
i still need them, and the setup program especially, i think it uses standard lpr once configured.. email at inventor_007 at yahoo.. thanks in advance..
I need a Manual for the Extended Systems ESI-2831 Pocket Print Server
×