Hi i had a copier 2 days ago e650 and really i dont know about toshiba copier , i know in canon , so while i turn it on start the screen showing the copier and then goes after 3-4 seconds to display call service . can i know how to solve it or to know what is the problem? thank you
You need to press the clear and the eight button. You will then see the error code. Let me know the error code and I may be able to help more.
http://www.tonerovernight.com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Getting into the setting mode and changing ANYTHING could really be a bad day for the office and the owner of the copier. In the 90's the Toshiba's had 30some codes in the setting mode now days there is over4000. The Admin has pretty good training on how to retrieve or change codes. They even are given the service managers and or salesman's cell number if they get into an issue. start with the User manual usually kept behind the copier in its holder or under in the stand. then go to office manager and ask for help. If you got the copier used without a book(s) then it would be a great opportunity to get to know your Toshiba Business Solutions company Rep~ you'll probably need a Prevent/Maint in that case. hope this helped a little Tosh tech 23yrs~~sc
Hi,it's look that is yourfocus motor or
the ccd are defective it is always the same problem whit this kind of camera.
you will to fix the lens and ccd
hope it is not the ccd....
have a nice days
It does sound like your cmos battery. It is located on your system board. If your confident you can take the laptop apart and get the details from the battery and then goto a pc shop and buy a new one if not take the laptop to the shop and they can replace it for you.
Make sure that you have all the installation files shown at the following link http://software.canon-europe.com/products/0010643.asp In Mac then start Solution Menu from the menu bar, select the Go menu, Applications, Canon Utilities, Solution Menu, then double-click Solution Menu. Select Use Solution Menu to get the information on the machine or change the print settings by only clicking buttons on a screen. With Solution Menu, you can start the software applications supplied with the machine or display the operating instructions. It also provides you with the information on troubleshooting.
If you get problems then please come back to me for assistance with details of what you have done and what errors you get etc.
hello gud day. i have 2 toshiba dp 3580,i have no comment on this.its really heavy duty..the copy is very clear and everyday my machine always functioning.no problem at all..easy to maintain .always keep it clean..
Just press these keys with sequence and with in 2 or 3 seconds .first press clear,then auto photo mode select key,again clear ,auto photo key,.copier will go dead .now press 14 then start key.problem will bi removed.
clear key,auto photo key,clear,auto photo key,
when display dead 14 start key.
BY MIAN JEE
C26 is a peak detection error (when the copier scans the white reference plate there is an error in the detection)
The most common cause of C26 error is the
failure the lens unit which is Toshiba's part number 6LA02100000.
The components that fail on the board are IC1
and IC10.
The board can be repaired, but most commonly it is replaced.
I've only had mine for 3 years- DVD didn't recognize 2 out of 3 discs or would cut out- started about a year ago. Today the whole picture went out. Just don't make them like they used to
I press clear and eight button . show c45 wht will i do
×