BIZhub C250 How do i add an address to the address book. there are some on here to save time typing address when scanning to email. however no one can remember what to do to add a new address. we have gone into the address book but to no avail there wasnt a "ADD ADDRESS" feature

You can download the manuals free from the KM Website:
http://help.bt.konicaminolta.ca

Click on the "Knowledgebase" link.

Utility/Counter button
#1 Create One-Touch

from there make selections that apply (Address Book).
once in the area you can create, edit and delete the one-touches

To set scan default:
Select Scan Mode
Press Scan Settings
Press File Type
Press TIFF
Press Multipage
Press Ok
Press Utility/Counter
Press User Setting
Press Initial Setting
Press Current Setting
Press Ok
Press Reset

This will only affect address book destinations. Program destinations specify within their settings the file type.

To scan front and back:
Select Scan Mode
Select Destination (must be done 1st!)
Press Scan Settings
Press Simplex Duplex
Press 2 Sided
Press Ok

If you are just adding your PC to the network first go to control panel click network set-up wizard.
to add your PC to print add printer from the control panel and look for the network printer. last you want to scan go the internet web browser input the ip address of the scanner or copier click public or administrator enter password 12345678 and click scan tab and add your PC host name or your email address if scan to email.

HH

: do u check with IP address?
Junoon007: The IP address of the machine where the data is saved and the name of the box are indicated in the body of the e-mail message

Junoon007: increase the machine's memory or change the scan settings
Junoon007: delete unnecessary documents from the hard disk, and then try sending again
Junoon007: type in the file name correctly
Junoon007: check that the box has not been deleted
Junoon007: a maximum of 100 documents can be saved in a single box.delete unnecessary documents from the box, and then try sending again
Junoon007: r u there sir?
Junoon007: check with above suggestions

After pressing "scan," press "Direct Input," then "Scan to E-mail." That will come up with a digital keyboard with which you can enter the e-mail. You'll have to type out the whole address, as on my printer (even though I have the manual) I can't seem to find out how to save it so you don't have to type it in every time...

However, after inputting the e-mail address, press "Start" and it should scan to the e-mail.

you have to input your computer name instead of ip address. also you may use reference or something to look up your computer form lan network, thats the best way. and if you find your computer and shared folder and first scan is completed successfully you may add this path to address book

Type in copier IP address in web browser. Go to scan, program and add new.

To scan to email, Administrator email address must be set in the machine (any bogus email address will work too).
Also, email server address must be input as IP address if DNS or WINS is not running in LAN.

Try re-entering user name and password or try a different user name and password for email account saved in the machine.

Hi, If it is set up as a network printer, then go to administrator settings & check the IP address of the machine.