Oven beeping The oven will start beeping and flashing a code 7.

F-7 error code means that the Function Key is stuck or shorted out. You will have to replace the touch pad or if the touch pad is part of the clock, you will have to replace the clock (ERC).

F7 code is 'shorted matrix or start key' could be due to a problem with the key panel or control.

Hello - This manufacturer does not show to have such an error code for a wall oven. However the error codes F30/F31 indicates that the unit either has an issue with the oven sensor, wiring with the EOC or the probe connections is open or shorted. Contact a professional to move forward accurately.

Hello Marylou,

The F7 code means the same thing on all domestic (USA) brand ovens.What is means is that a button on the touch pad is shorted (welded together) out. Since you did not include brand or model#
i will give you the following advice, if your touch pad is a seperate part that plugs in clock (also called the oven control,or eoc..electronic oven control) then just the touch pad can be replaced,on certain brands or even some models within a brand the touch pad is integrated into the clock/oven control or eoc in that case the complete touch pad/control asm. is what needs to be replaced

Hope this helps and if it does please give me a 4 thumbs up rating

Gene

Turn off house breaker to the unit at the breaker box of your home. This will be a double breaker.

F7 Touch pad or Control board...... Most techs start with touch pad.

you can google your oven model for its codes. on our maytag oven the F1 code means defective touch pad or control board.

you have a bad oven temp sensor probe

if it is an E0-F2 error code then i believe it is for a bad control or keypad.. i would replace both.

Hi phill6x6...try turning on the oven by the main button, and press and hold button 7 until it beeps. Hope this helps you, and a few others!!

Replace the oven sensor located in the oven cavity.