Question about Panasonic VIERA TC-P55ST50 55 in. 3D Plasma HDTV
Was watching tv and the picture just went black , i could still hear sound. turned off tv and turned int back on but did not see the viera bottom bar come up like normal. the power light just shows red like normal.. tv is only like 2 months old.
SOURCE: Screen just split in half
Is the tv still in warranty? The problem is the upper buffer board, it's a small board that controls the upper portion of the screen. You will have to consult a service center to get it, it's very easy to install
Posted on Apr 16, 2007
Problem is caused by voltage irregularity. Pulled plug for an hour and then plugged it back in. TV reset and it works fine. If this does not work it needs a TV technician.
Posted on Sep 15, 2009
It is either the plasma panel itself or a connection problem, either way it will need to get serviced. Suggest you find receipt and phone Panasonic.
Posted on Sep 27, 2009
SOURCE: My Panasonic Viera 42" Plasma,
Typically this means you've got a power supply that went bad. I've been doing research for a potential class action lawsuit on these "blinking lights of death" problems that the Panasonics are having and that is usually why the tv will show 10 blinks. Occasionally another component inside the tv can be what caused the tv to shutdown and show the 10 blinks.
I'd like to hear more about your experience with the television and any contact you've had with Panasonic in an attempt to get the television repaired. If you're inclined to share your story with me, please contact me at [email protected]
Posted on Nov 27, 2010
Tips for a great answer:
Jan 14, 2016 | Samsung LN52C530 52" LCD TV
Jul 18, 2015 | RCA Televison & Video
Jul 18, 2015 | RCA LED46C45RQ 46" LED TV 1920x1080,...
Oct 15, 2014 | Panasonic VIERA TC-P55ST50 55 in. 3D...
Jan 13, 2011 | Sanyo 42 in. LCD TV
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: