Battlestations pacific won't launch

Sounds like its main power board [SMPS] fault. Check and replace it. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Google search how to play this game, it's too obscure for most of us to remember.

it just not completely downloaded

You need to call paypal on this.1-888-221-1161
1-402-935-2050 (if calling from outside the U.S.)

4:00 AM to 10:00 PM Pacific Time Monday through Friday
6:00 AM to 8:00 PM Pacific Time Saturday and Sunday
Please note that hours of operation may vary on holidays

the derailleur cable is too loose. Shift the shifter into the smallest cog, make sure the chain is on the smallest cog. The derailleur cable will most likely be very slack now. At the rear derailleur, there will be a nut or a allen bolt pinching the cable to the derailleur. loosen this, pull the cable finger tight, tighten the nut or bolt again and then try shifting again. You can dial it in using the barrel adjuster on the derailleur or the shifter.

Contact Us PayPal Customer Service:1-402-935-2050
(a U.S. telephone number)
4:00 AM PST to 10:00 PM Pacific Time Monday through Friday
6:00 AM PST to 8:00 PM Pacific Time Saturday and Sunday
Please note that hours of operation may vary on holidays

If all else fails, read the instructions!! First would have been better.

Its problem regarding directx 9,
reinstall directx again

I HAVE BATTLESTATIONS MIDWAY !!!!!!! i cannot start the software

Hi

You need to email Eidos and explain the situation.

We do not supply codes for games (this is to prevent piracy) Any expert that does will be reported.

I hope this helps

Steve :)