I own a C66 inkjet printer. I recently replaced all the ink cartridges. Afterwards I ran a test page because there were faint lines on the paper. I repeated the cleaning process several times and now my printer doesn't print at all. I went thorugh the website support and followed the directions several times and I'm still getting a blank page.
If you have tried new cartridges and many cleaning cycles with no change, then it would be best to just replace the unit. Contact Epson as they may be able to offer you a good price on a replacement unit.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
quite often inkjet heads will dry up and clog. try a clean heads sequence in the printer properties panel. do this until it prints the clean nozzle page properly. If the ink cartridges have the print head attached to them (some dont) you can dab them on a paper towel with windex or vinegar until they show a nice clean line when dabbed. if you cant get the print heads out , then you just need to continue running the clean nozzel application until it prints the test nozzel job properly. This is the reason I will not buy any more inkjet printers. only Toner based machines.
Forgive me for asking this, but roughly speaking about 80 to 95% of problems involving ink or toner are resolved by the following: Are you using a factory new ink cartridge supplied by the manufacturer of the printer? If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges. They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead. Don
“Lexmark does not support the refilling of its ink cartridges. Refilling the ink cartridges can cause them to leak, thus clogging or even damaging the print head. Any damage to your printer caused by refilled ink cartridges may not be covered under warranty”. Please use genuine Lexmark cartridges for best results.
Take the cartridge out and put it back in then try to print, if it is still the same try cleaning the print heads>control panel>right click on c66 and go to printing
preferences>maintenance tab>print head cleaning>do it 3 times and then try to print