Question about D-Link DSM-G600 (DSMG600) Network Storage Server
I have been using my D-Link DSM-G600 (rev. A) for about a year with success (both wirelessly and wired). Recently, I lost access to the files on the hard drive. Specifically, my computer could no longer access the drive that I mapped for the DSM-G600. Interestingly, I am still able to access and modify the device's settings through its IP address and menus. D-Link told me to reset and reflash the firmware. I am not sure exactly what is meant by this, so I reloaded the latest version of the firmware. This did not correct the error. I also rebooted the device and reset to factory settings, with no resolution of the problem. After the problem developed, I got a new computer (running Vista). I see the same problem on the new computer. Any suggestions or help would be greatly appreciated. Thanks!
Take a look here for a possible solution:
http://www.linux-watch.com/news/NS4434907782.html
Posted on Nov 17, 2007
Vista is only going to complicat things, try re mapping the drive, delete the shortcut and use my network places to find the drive then make a new shortcut to it if you can access it from there, i've had windows 2000 do the same thing especially with my laptop that I take to school, it a lot of times its due to changing ip's but occasionally windows just seems to forget where stuff is on the network and needs to be reminded. shortcuts can be made by draggin the folder to the desktop or desired location or right click the share you want mapped and select map network drive.
Posted on Apr 21, 2007
579 views
Usually answered in minutes!
×