Hi i have a zanussi fx1465w presently giving 5 bleeps &flashes of the indicator light any idear what this cauld be as the washer is not functioning after filling
Re: Hi i have a zanussi fx1465w presently giving 5 bleeps...
5 flashes is motor down to earth usually resulting in replacing the motor. Sometimes the motor may have got damp you can try to dry it out if it looks damp this may work but its usually the motor itself.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try this.. Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an "E" followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up.
zanussi zwf1650w washing machine. when starting any program after a few seconds machines stops and shows draining 0.0. have done diagnosis test and shows fault E91 & E48 fault codes also shows E34 code. any help much appreciated.
the dryer is telling you a trouble code like in a car when something is malfunctioning with it, try to call your manufacturer and ask them to tell you what that code means.
This indicates error code E90. Sometimes its a loose connection to the front control board. But it would usually require a replacement one Zanussi call them a user interface hope this helps you.
i know the bolt you mean and i find it is impossible to shift zanussi issued a bulletin saying to give it a good blow with a hammer to break the loctite that is used. i never found this works. the only way i found of doing it was to heat with a needle flame from the oxy/butane burner i kept for fridge work
At bottom left of machine there is a small metal flap where you can drain off water. Next to that is a grey pipe you can keep pulling and pushing i have done this quite a few time and it has let out sludgey stuff put washing machine is now spinning and draining. Good Luck.
×