Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

No picture, stuck on Video 1, volume self-adjust to maximum

My TV has had changing symptoms. Last summer, it would cycle through all the channels on its own. Then it worked fine for a few months. It was off during the cold weather, and when it was plugged back in, the TV was immediately on, stuck on video 1, no picture, and the volume level went to maximum, and would not turn off. The volume control would lower the volume, but it returns immediately back up to maximum on its own. I can now turn off the TV (new symptom), but most of the time after hitting the power button and then the menu button. Sometimes the power button will turn off the TV, it's intermittent. When I turn the TV on, the standby light flashes about 4 times, even though the audio is immediately on, but it is always stuck on Video 1 with no picture. Any ideas?

Posted by Gail Meyer on

Ad

1 Answer

Anonymous

The tacticle (micro switches)on the front of the main chassis have most likely gotten wet at some time,I suggest replacing them all.

Posted on Apr 06, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Toshiba projection TV model 57HX81. The volume is at its maximum. You can adjust the volume screen indicator, but the actual volume does not change. Can u help me?
volume is stuck wide open. cut speaker wire

May 24, 2015 | Toshiba Televison & Video

1 Answer

ON/OFF, CONTROL ISSUES
Sounds like the main board problem. You can get parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Jun 13, 2017 | Hitachi 32HDL52 32 in. LCD Television

1 Answer

Been having sound problems for 6 months.. At first i could just adjust the volume up and down and it would come back on now it won"t come on at all. picture perfect just no sound. Tryed changing from...
ensure TV's 'mute' is not on. use buttons on TV to adjust volume up and down. if not working properly, you may have a volume adjustment on your cable modem which needs to be turned up to maximum. if sound works, all is well. if sound still not acceptable your TV needs repair.
if TV buttons adjust volume OK, and your remote for TV does not properly adjust volume, try fresh batteries. if
remote still not working properly, you can buy replacement on EBay or try a genaric remote from a dollar store. also, i may have an extra remote for you.

Mar 03, 2018 | Samsung PN58B540 58 in. Plasma HDTV

1 Answer

The volume of sony wega kv-sw29m61 set always to maximum when it turned on
On your remote control (with tv off)
1. press Display, channel 5, Volume Up and then Power
this brings up the service mode (you will see some green text on your screen)
2. Press channel 2 to scroll through options until you see "Micro" in the upper left of your screen
(channel 2 cycles up through the options, channel 5 cycles down)
3. Press channel 1 to scroll through suboptions until you see "DIOF" appear under "Micro"
(channel 1 cycles up through the suboptions, channel 4 cycles down)
4. Press channel six until the default value (12:60) changes to 12:40
(channel 3 increases the value, channel 6 decreases the value)
5. Once the value has been changed to 12:40, press Muting and you should see red text in the upper right hand corner that says "Write"
6. Simply turn the power off and back on for the change to take effect. Your volume problems should now be fixed.

Jan 16, 2010 | Televison & Video

1 Answer

Sony FD Trinitron WEGA TV Model Number KD27FS170 volume problem
my sony trinitron is blinking six blinks and I cannot turn it on, please help

Nov 22, 2008 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

''Hotel'' Viewing mode on Akai TV Model #CTS2550
Did you get an owners manual with the television?

Jul 01, 2017 | Akai CTS2550 25" TV

2 Answers

Toshiba 42h82
1. ENTERING TO SERVICE MODE
 MUTE
S
(Service mode display)
3) While pressing the MUTE button,
press MENU button on TV set.
2) Press MUTE button
again to keep pressing.
1) Press MUTE button twice
on Remote Control.
2. DISPLAYING THE ADJUSTMENT MENU
 1) Press MENU button on TV.
Adjustment mode
Press
Press
Service mode
Item
S Data
3. KEY FUNCTION IN THE SERVICE MODE
 The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF: TV (ANT)/VIDEO button (on TV)
Selection of the adjustment items : Channel s/t (on TV or Remote)
Change of the data value : Volume s/t (on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : RECALL+Channel button on TV (s)
Initialization of the self diagnostic data: RECALL+Channel button on TV (t)
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“SCNT” selection : 4 button
“SCOL” selection : 5 button
“TNTC” selection : 6 button
Convergence adj : 7 button
Self diagnostic display : 9 button

Oct 21, 2008 | Televison & Video

1 Answer

Panasonic Viera 42in Plasma: Lost Function in Volume, Input, and Channel changing buttons on TV
You have a main board issue with the set.

Jun 20, 2017 | Televison & Video

1 Answer

Left Surround Channel
Try to tighten the screws at the back where you insert your A/V jacks.

Thanks!

Apr 10, 2008 | Onkyo TX-DS575 Receiver

1 Answer

Convergence adjustment @ 52MH84
press mute on the remote then while pressing mute press menu on the set.then you navigate with the instructions below.
3. KEY FUNCTION IN THE SERVICE MODE
 The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF: TV (ANT)/VIDEO button (on TV)
Selection of the adjustment items : Channel s/t (on TV or Remote)
Change of the data value : Volume s/t (on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : RECALL+Channel button on TV (s)
Initialization of the self diagnostic data: RECALL+Channel button on TV (t)
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“SCNT” selection : 4 button
“SCOL” selection : 5 button
“TNTC” selection : 6 button
Convergence adj : 7 button
Self diagnostic display : 9 button

Jan 21, 2008 | Televison & Video

Not finding what you are looking for?

View Most Popular

FD Trinitron WEGA KV-32FS120 32" TV

  • Televison & Video

Related Question

I have a Toshiba projection TV model 57HX81. The volume is at its maximum. You can adjust the volume screen indicator, but the actual volume does not change. Can u help me?

  • Toshiba Televison & Video

Open Questions:

0 Answers

How can I disable standby timer?

Feb 12, 2016 | Sony FD Trinitron WEGA KV-32FS120 32" TV

0 Answers

sony wega tv not save all chennal and sound

Aug 29, 2015 | Sony FD Trinitron WEGA KV-32FS120 32" TV

0 Answers

Low power savin mode on Sony TV

Apr 18, 2015 | Sony FD Trinitron WEGA KV-32FS120 32" TV

0 Answers

how to fix sony tv v stop

Jul 12, 2014 | Sony FD Trinitron WEGA KV-32FS120 32" TV

See all Sony FD Trinitron WEGA KV-32FS120 32" TV Questions

Related Topics

Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

142 views

Ask a Question

Usually answered in minutes!

Popular Questions

11 Answers
While trying to access Netflix account, Sony

Sony Televison & Video

3 Answers
How to do a complete factory reset of a Sony Bravia KDL-32P3000

Sony KDL-32S3000 32 in. LCD...

6 Answers
COMO PUEDO QUITAR EL MODO

Sony Televison & Video

5 Answers
Sony Trinitron XBR, Stand By Mode?

Sony FD Trinitron WEGA...

4 Answers
Hdmi port stopped working on sony bravia

Sony Televison & Video

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

230 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. FD Trinitron WEGA KV-32FS120 32" TV...

FD Trinitron WEGA...

Loading...