Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

GE XL44 Range

When the oven is used at a temperature of 400 or over, an F2 code appears and the oven shuts itself off for several minutes. Is there a fix for this? Thanks

Posted by John Cuthbertson on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

It sounds like a thermal sensor is cutting it off.(a bad sensor,or wrong sensor)Is it a new range? Has it been repaired before?

Posted on Apr 02, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ge range jmp28got1w1 i was getting a f2 code i replaced the oven sensor iturned on the oven to 400 degrees and within 3 4 minutes i got a f3 code can you help?


Hi

F2/F3 Error indicates a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel

Aug 22, 2011 | Kitchen Ranges

1 Answer

My ge xl44 gas range, installed in 2000, turns off and flashes an f2 code occasionally. Can you give me the reason?


F2 means: For an unknown reason, the oven temperature has exceeded a preset threshold.

G.E. recommends you try this:

Sometimes shutting off the circuit breaker that the range or oven is connected to for 30 seconds will clear the fault, error or function code, however there are some cases when further service may be required. If you would like to schedule a service appointment, please contact GE Consumer Service at 1-800-432-2737


Here is the fault code guide link:

http://www.geappliances.com/search/fast/infobase/10009792.htm


May 20, 2010 | GE Kitchen Ranges

1 Answer

Describe your GE Profile Spectra XL44 Oven


My GE Profile Convection Microwave Oven will beep and display a F2 for no apparent reason. What is this?

Mar 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I can not find my manual for the range. I have a


Hi casharri,

Go Follow the link to get the manual =

http://products.geappliances.com/ProdContent/Dispatcher?REQUEST=ITEMID&itemid=49-85020

error F2 = Control senses oven temperature above 615F-630F


If actual over temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Regards
R.K.

Oct 15, 2009 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

F2 Error when using the oven GE XL44 Gas Range


Control senses oven temperature above 615F-630F


If actual over temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Jul 23, 2009 | GE Spectra JGBP35 Gas Kitchen Range

1 Answer

GE XL44 Oven Temperature Issue


Have you tried replacing the bake ignitor yet?

Dec 06, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge gas oven/ranger xl44


The F2 is the code for the board seeing a temp higher than 600 degrees. It could be one of two things. The temp sensor is out of range, extreme high resistance. If you ohm it out it should read approx 1100 ohms at room temp. The other would be a welded bake relay on the board itself. Check the temp sensor first. If you are getting the F2 in the cleaning cycle, check the temp sensor, welded clean cycle contacts on the board or both contacts on the lock switch are closed at the same time. This is for the model posted JGBP90.

Nov 24, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

F2 error


I have the same problem... I unplug the range wait 30 seconds ...the plug it back in..usually works. Remodeling soon .. next range not GE!

Sep 09, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

Ge spectra xl44


check your Measure oven temperature sensor circuit at oven temperature sensor (should be approx 1100 ohms at room temp); check for cut or pinched wire or loss of contact and /or Replace Electronic Range Control (ERC)

Dec 18, 2006 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

Related Topics:

415 views

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Cindy Wells

Level 3 Expert

6262 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...