Pioneer SD-P50A5-K 50" Rear Projection Television Logo
Anonymous Posted on Apr 01, 2007

Pioneer sd-p50a5-k remote does not work on tv

We replaced the batteries and it seems to work on the dvd or vcr using other buttons that was programed but I cant get it to work on the tv which it was made for. Is there a way to test the remote circiut on the tv to see if it is the tv or the remote. I was told that the code projection tv's use is a 3 digit code and that most universals use a 4 digit code. I was told the code for mine is either 300 or 013 is this true. the tv works great but is a pain with out the remote. the buttons work good on the front of the tv but I can't switch ant's a or b that way. any help would sure be appreciated

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,284 Answers
  • Posted on Apr 05, 2007
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jan 21, 2007
Answers
1284
Questions
1
Helped
500613
Points
3271

The code will vary depending on the maker of the universal remote control. Purchase a universal remote as they are usually around 15 dollars and try it out. Make sure Pioneer TV's are on the list.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Remote menu button not working

Sometimes you can enter a code that will work nearly all the buttons, but is not the correct code for your DVD player. You should try other codes. But sometimes a universal remote will NOT work every function.
2helpful
1answer

MWD2205 remote stopped working for DVD functions

not sure but it sounds like you need to push the dvd button itself before dvd functions will work-it's to the left of the pause button. same thing happened to me and when i try that it works. remote seems to default to vcr i guess ....
0helpful
1answer

Can this TV be used with Nintendo WII video games without damage to the screen? 1997 pioneer SD-P50A5-K

Yes, assuming you are using the included composite video / stereo audio cable with RCA jacks. The output would be 480i and the set would handle it the same as it would any other signal at the same resolution and refresh rate. If you mean damage to the front of the screen because of losing control of a remote, then it doesn't matter what model of TV you use. :p
0helpful
1answer

NO PICTURE FOR MY CABLE

check your hookup and check your input button on the front of the tv hope this help's Rocky
0helpful
1answer

Tuning SD-M1407

use the button's on the front of your tv or buy a universal remote it will help with some function's $5.00 anywhere or you can buy a refurb remote for $135.00 on the internet rocky
0helpful
1answer

Tv codes

Hello, Well I have a Phillips universal remote but but maybe they are the same. For the Orion TV try 105, 115, or 713. For The Pioneer DVD Try 042. If one or more does not work, Look for a "code Search" button. Turn on the device, then push and hold down the code search button until the red indicator stays on, then release the search button. Press and quickly release the desired mode button (TV, DVD, etc). The red indicator blinks off once. . If it is a tv or vcr use the channel up button until the channel changes. Press the power button on DVD and see if it is right Hope this helps.
0helpful
1answer

No audio or video

Hi,

If you can see the channel number as well as the volume setting when you press on the appropriate buttons on the remote, then it would seem that what happened is that your TV went into muting (video and audio). This can only be brought about if the TV is not receiving any signal from your cable or aerial. This is a built-in feature. Another possibility is that the tuner section of the TV has some issues. To determine whether cable or tuner, pls try installing a known operational VCR and play a good tape. Connect the RF OUT of the VCR to the CABLE/ANT IN of the TV. Select channel 3 or 4 and should you be able to watch the tap video, then you have just confirmed that it is your cable (or aerial). If on the other hand there is likewise no display on either 3 or 4, then you have just confirmed that somethings needs to be done internally in the tuner section.

Hope this be of some help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.
0helpful
1answer

Big Button Remote Control

This is because you did not use the right remote code. Try trying different codes and test different functions with your recorder. Try searching on the Pioneer wesbite for remote codes. I would get the codes for you, but I don't have your model number so I can't. You can search for them yourself or comment back informing me of the model.

Hope this helps :)
0helpful
1answer

Universal remote(s) won't work

Use the buttons on front of your (tv) channel up & down allows you to scoll thur menu vol- vol+ allows you to adjust settings.Need anymore help let me know. ThankYou for using FixYa. Have a Nice Day.
Not finding what you are looking for?

156 views

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6699 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...