Question about HP Photosmart C5180 All-In-One InkJet Printer
My 3210 will not print, scan or copy. I have a error message - Ink system has failed. Unable to print, receive faxes or copy. Refer to printer documentation. Error Oxc18a0206 I have the same problem....
Problem solved. Thanks to www.out-of-warranty.com.
Read: Troubleshooting. Very helpful.
Posted on Jan 10, 2013
IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
Press the On button to turn the printer off.
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on.
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.
Posted on Feb 03, 2009
SOURCE: I have a Ink System Failure.
I had this same problem but with a different error code. Try doing:
1. Unplug the power cord from printer.
2. Hold both o.k and Cancel simultaneously.
3. Plug the power cable while holding the buttons.
After I did this my printer reconfigured like it used to do and it was like it was new again.... well new plus a headache a managed to get while reading all these little posts. I hope this helps!
If not try going to this website:
Posted on Sep 08, 2009
Tips for a great answer:
Dec 29, 2010 | Office Equipment & Supplies
you need more help come back.
/ thumbs / testimonial are welcome!
Dec 20, 2010 | HP Photosmart 3210 Printer
Nov 06, 2009 | HP Photosmart 3210 Printer
Mar 01, 2009 | HP Photosmart 3210 Printer
Mar 02, 2008 | HP Photosmart 3210 Printer
May 19, 2014 | HP Photosmart C5180 All-In-One InkJet...
685 people viewed this question
Usually answered in minutes!