Question about Frigidaire AEQ7000EG Affinity Series Electric Dryer
* Wake the washer by pressing any button. * Wait 5 seconds. * Press and hold the Start and Pause/Cancel buttons simultaneously. * All LED's will go blank and after a few seconds the control will signal the stored code using audible beeps and blinking LED's. The control will repeatedly signal the code, as long as the Start and Pause/Cancel buttons are pressed. A two second pause between repeats affords you the ability to make accurate counts to identify the correct error codes.
Posted on Aug 22, 2012
Tips for a great answer:
Please check this link
for the manual if it helps :-
Please get back to us if
you have further query else please accept the suggestion.
Usually answered in minutes!
Step 2: Please assign your manual to a product: