Question about Nakamichi SoundSpace 10 System

Open Question

Nakamichi soundspace 10 home theater

All of a sudden I cannot hear the voices, of the actors, through my surround sound system. All else works fine. My center speaker seams to be working fine. The voices are faint but the rest of the sound is brilliant.

Posted by david drucker on

  • Anonymous Jan 24, 2009

    I NEED APART FOR OB61506

    SUBWOOFER UNIT-L

    SERIAL NO: S35502114

×

Ad

2 Related Answers

Anonymous

SOURCE: Nakamichi SoundSpace 8 System

check your power cord, check your 9 prong relay cord from power amp to deck unit, check your fuse that is in a little slot in the plug itself, most importantly check the 9 prong plug to the control unit itself, if you are mounted on the wall it could easily come out enough to not make connection. these units will take alot of bad voltage errors, if the only thing not working is your cd player you should still be able to eject it, if not it is power related, if it will eject but not play then your drive band is broke and unless you are very very mech minded take it to a repair shop who is nach. refered just look online for service try my ideas 1st you might get lucky, I hope I am right!!

Posted on Mar 12, 2008

Ad

Anonymous

  • 3 Answers

SOURCE: Surround sound menu

look in your manual, you might need to use the remote control.

Posted on Aug 20, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Some of the voices do not play. I will have sound but no sound comes out when actors speak.
The speaker that produces the dialogue (not the music or any other sound effects) is the one that is in front, in the center (compared to the other front speakers, the shape of it is short and long). On my system, it is the plug/jack that is green in color-- yours might be a different color, but the plug should match up w/ the jack that is labeled "center." If that speaker isn't working, or isn't plugged in properly, that may be the reason why you don't hear any of the spoken dialogue. Hope it helps

Jul 13, 2010 | Toshiba SD-KT50 System

3 Answers

SONY DAVHDZ278 BRAVIA HOME THEATRE SYSTEM SURROUND SOUND PROBLEMS
OK, it is called Cold Reset
Turn unit ON and press following 3 button on same time..
STOP - EJECT - POWER
Display will show Cold Reset briefly and DAV-HDZ278 is reset to default settings.
Thanks.

Aug 20, 2009 | Sony Audio Players & Recorders

2 Answers

Sound problems
panasonic sa th-440 f61

Aug 18, 2009 | Venturer STS152 System

1 Answer

When watching a DVD, the surround sound plays all background music but the actors voices are not heard - can hear music and voices in 2 speaker only - TV programs play in 2, 3, and 5 speaker mode.
If there is nothing at all from the center channel while watching a DVD, first try resetting the system (unplug the power cord from the sub, and the DC power cord from the media center for 30+ seconds) If a reset doesn't help this, run the "adaptIQ" setup disc again. Honestly, this is a very odd problem for that system to have. (especially since we know the center speaker works for other sources) I hope this helps.

Jun 20, 2009 | Bose Lifestyle 28 System

1 Answer

Have stopped getting voice audio.
Reinstall the Audio Device driver .

Mar 31, 2009 | Audio Players & Recorders

1 Answer

Polk Audio RC55i In-Wall Surround Speakers (can't hear whispers)
I'd make sure that the receiver surround mode is set for one of the digital settings, such as Dolby Digital or DTS, and make sure that you have the center channel level adjusted to a level similar to the other two front channel speakers. I've seen/heard this happening when using dolby digital material & having surround set on something like 'hall' or 'stadium' or dolby surround, where only 4 channels are used & the amp has to 'mix' sounds to the left & right front speakers. It'll often sound like the actors on screen are talking out of the bottom of a barrel, with a hollow & tinny character to the voices.

Jan 07, 2008 | Polk Audio RC55i Main / Stereo Speaker

1 Answer

Actors voices
Hi....

If your system is set up for surround and you dont have a center speaker that will happen.
Check the manual for best setup

Jan 05, 2008 | Pioneer VSX-D711 Receiver

1 Answer

Surround center speaker does not work
This is a 5.1 (6 Channel Technology) You should hear only the voice thro the center speaker. If the source you are playing is stereo, however the software splits the source its difficult to seprate the voice track, if the source is a DTS 5.1, then you should hear the voice only thro the center speaker. eg: when you play a DVD movie which is DTS 5.1 then you should hear only the voice track in the center speaker, if the dvd movie is just stereo then you will not hear any audio in the center speaker, while the other four speakers get output, this is the special effect in 5.1 ( 6 channel Output).

Dec 27, 2007 | Inland 58019 ThunderSound 5.1 PCI Sound...

3 Answers

No dialog sound when watching DVD's
The problem is that your center channel is not functioning correctly.  Dialogue is typically routed to the center channel only in 5.1, so if you don't have a working center channel all you will get is sound FX and background sound.
Go through all your settings, verify that they are correct.  Verify that your center channel is working properly, and wired to the correct output.
Test the center channel speaker and I feel confident you will find something amiss.

Dec 09, 2007 | Koss KS2503 System

1 Answer

Poor voice track but great sound.
Unhook your center channel speaker and see if it still goes into protect.You might have bad center speaker

Sep 09, 2007 | Sony STR-V555ES Receiver

Not finding what you are looking for?

View Most Popular

SoundSpace 10 System

  • Audio Players & Recorders

Related Question

Some of the voices do not play. I will have sound but no sound comes out when actors speak.

  • Toshiba SD-KT50 System

Open Questions:

0 Answers

My nakamichi LED Television Model :TN42LE-F,Serial no:211-1300149 need software of it.TV is not working.When I switch on the tv the display is "connect the USB ".The mechanic told me that it requires software of tv.pls give me a solution to solve this problem

Aug 25, 2013 | Nakamichi SoundSpace 10 System

Related Topics

Nakamichi SoundSpace 10 System Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

2 Answers
I have AV10 universal remote

Nakamichi AV-10 Receiver

1 Answer
Comcast Remote Code for Nakamichi Soundbar

Nakamichi Audio Players &...

2 Answers
No Sound from Turntable

Nakamichi AV-7 Receiver

2 Answers
Nakamichi R 1 receiver

Nakamichi Audio Players &...

4 Answers
Lost Manual Nakamichi AV-10

Nakamichi AV-10 Receiver

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top Nakamichi Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76518 Answers

SANE AGAIN

Level 3 Expert

37972 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Nakamichi Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...