Question about Yamaha HTR-5890 Receiver

1 Answer

Factory reset Just wondering how to do a reset on this model?

Posted by on

  • Anonymous Jan 06, 2008

    i also need this manual please

    Yamaha HTR-5890

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Here's the link to the product page; http://www.yamaha.com/yec/products/productdetail.html?CNTID=200016&CTID=5000400 You have to register to download the manual, but it is free. Once you have registered click downloads and the manual is available here. Page 73/74 describes the reset procedure for the remote control unit. For the main unit go to page 63 "Parameter initialization", this procedure is the factory reset. If for any reason you can't get this to work, unplugging the unit from the mains for more than 1 week will reset the memory, there is an internal memory rechargable cell which if you could identify it (sorry i have no drawings) may be able to be disconnected and save you waiting a week. Yamaha does not suggest this option anywhere though, so it may not be possible. Hope this helps, please ask again if you need more info :)

usa.yamaha.com

HTR 5890 HTR AV Receivers Audio Visual Products...

usa.yamaha.com

ILikedtheYamahaHTR 5890onusa yamaha...

Posted on Mar 31, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I'm wondering if there is any way to find out what part I am needing to repair my tv. Vizio 1080p 55" Led tv. Model M3D550SR The tv acts like it's coming on, and I see a back light, but I cannot see...
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jul 27, 2017 | Vizio Televison & Video

4 Answers

I need a service manual
please buy the manual at repairclinic.com

Mar 24, 2008 | Televison & Video

1 Answer

I have a seiki model se55uy04 that has power but there is no picture black screen and no audio was wondering if the main board may be bad as the power supply is good.
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Oct 04, 2016 | SEIKI Digital SE55UY04 55" Ultra HD LED TV...

1 Answer

Have vizio t v model # vw 37LHDTV 20A goes on then goes black wonder what might be wrong
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory ResetF (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jul 19, 2016 | Vizio Televison & Video

1 Answer

How to do a factory reset or Hard reset on a Canon LBP2900B Laser printer?
I would check with the CANON website and tech support https://www.usa.canon.com/internet/portal/us/home/support

Jul 07, 2016 | Canon Office Equipment & Supplies

1 Answer

Forgot my back up pin to unlock my phone need my old pin number or step by step process to do a hard reset

How to Factory Reset an iPhone (Any Generation) ' Digital ...

www.digitaltrends.com/mobile/how-to-factory-reset-an-iphone/
Dec 15, 2015 - How to factory reset an iPhone with or without using iTunes, no matter ... A clean slate can do wonders in life, especially when it comes to the ...

3 Ways to Hard Reset an iPhone - wikiHow

www.wikihow.com > ... > Smartphones > IPhone

wikiHow

Dec 29, 2015 | Cell Phones

1 Answer

How to set the dell inspiron 2650 model # PPO4L back to factory settings
Anonymous,
The Inspiron 2650 did not ship with a recovery image. You will need to manually reinstall Windows, drivers and software.
Thank You,
Dell-Jesse L
Dell Social Media and Communities

Feb 11, 2015 | Dell Computers & Internet

1 Answer

Factory Settings
What model Sanyo television?

Jul 27, 2013 | Televison & Video

2 Answers

Emachine model el1200-06w has a virus will not allow me to rest to factory default emachine wants to charge me 129 for answer on how to reset
Try downloading and installing malwarebytes,this little free program does wonders.you can find it on google.

Nov 08, 2010 | Computers & Internet

2 Answers

How to reset to factory default
Hold the reset button in for 10-15 seconds... Now its defaulted back to factory and the user name and pass will both be admin.

Hope it helps.

Jul 05, 2010 | VXL Instruments Itona TC3841 Network...

Not finding what you are looking for?

View Most Popular

HTR-5890 Receiver

  • Audio Players & Recorders

Related Question

Hello, I'm wondering if there is any way to find out what part I am needing to repair my tv. Vizio 1080p 55" Led tv. Model M3D550SR The tv acts like it's coming on, and I see a back light, but I cannot see...

  • Vizio Televison & Video

Open Questions:

0 Answers

yamaha htr-5890 receiver clicks on then off. My yamaha htr-5890 receiver will turn on, display volume with dB for two seconds then turn off. I can hear it click and run for those two seconds then it clicks off. My guess is it needs a fuse or it is going into protection mode and I do not know where the fuse is located or what I can do to fix this. I do not have any wiring plugged in.

Feb 23, 2013 | Yamaha HTR-5890 Receiver

0 Answers

Yamaha HRT 5890 I have contunuity between the input and output on the high side. The 10a fuse was open i replaced with the same result click but nothing else. Can I buy a new transformer? Where can I find one. I have klipsh F3 synergy towers with a 12" klipsh sub. I was running the reciever @ full throttle. I wonder if the cooling fan was working because she always runs hot and I never hear the fan?

Aug 23, 2017 | Yamaha HTR-5890 Receiver

Related Topics

Yamaha HTR-5890 Receiver Logo

Related Topics:

770 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Yamaha HTR-6030 Receiver

Yamaha Audio Players &...

Yamaha R-V905 Receiver

Yamaha RX-V473 5.1 Channel...

Yamaha RX-V463 Receiver

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top Yamaha Audio Players & Recorders Experts

Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. HTR-5890 Receiver Manual

HTR-5890 Receiver

Loading...