Kenmore 80754 Top Load Stacked Washer / Dryer Logo
lauren luu Posted on Mar 31, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Washing machine agitates but won't drain

Hi, i have a kenmore 80 series washing machine. as of right now it will fill up with water, agitates, it will click 3 times and completely stops. the next cycle is the draining part and it won't drain. thanks alot!!!

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Apr 06, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Apr 06, 2007
Answers
1
Questions
0
Helped
155
Points
1

The same thing is going on with my machine; I already checked the lid-switch and everything seem fine there. I am going to check the pump right now for anything strange.

douglas smith

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,462 Answers
  • Posted on Mar 31, 2007
douglas smith
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Mar 19, 2007
Answers
1462
Questions
0
Helped
898174
Points
3964

If it has a filter, check for blocage. otherwise check hose down to the pump and for foreign objects (coins etc) in the pump

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Kenmore 80 series model # 110.82382110 fills, agitates and drains but won't spin

Based on the information you provided, you need to replace the wig wag on the unit. No joke, that is what the part is called. Here is a link to the part to order.


1helpful
1answer

Kenmore series 80 will fill but won't agitate or spin

Hi

First make sure that nothing is blocking the drain pump assembly located inside the bottom of the unit, after this test the lid switch assembly, you jump it to test it. If the lid switch is also fine then the control board should be replaced. Hope this helps...please post back for further assistance.

Daniel

2helpful
1answer

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...

Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch.
1helpful
1answer

Kenmore 80 Series draining problem

Check the following before replacing the timer.

1. Clogged drain line or water pump
Check to see if there's something stuck inside the pump or the drain hose connected to the pump (pump is usually located at the bottom and towards the back of the washing machine).

2. Water Pump
If the drain line isn't clogged, you may have a problem with the water pump such as a frozen pulley or a broken impeller. If that's the case replace the water pump. Note: if you have a belt driven washer, check the belt(s) for cracks, as this would be a perfect time to replace the belt(s) if needed.
1helpful
1answer

Kenmore 80 series washing machine agitator will not rotate

you need to replace the agitator dogs, very simple. Go to www.shop.washermd.com and download the tutorial, thanks
6helpful
3answers

Kenmore washer 80 series 110 model not spinning.

unless your washer is over 20 years old, then it wont have a belt. the temperature of the water wont have anything to do with it spinning or not.
need to know if it agitates or drains and just wont spin.
if it agitates but no spin or drain, then you have a bad lid switch.
if it wont agitate or spin, but will drain, then you have a broken drive coupling.
Not finding what you are looking for?

165 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6687 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...