Motorola L6 bought the motorola l6 and i used it a couple of times, but now when i try to make a call i just get 'unassigned number' on the screen and wont allow it, tried ringing different numbers to various networks but does the same with all. i dont have the manual. any help would be great, thanks

SOURCE: motorola l6 phone, on orange, keeps displaying the ''insert sim' error.

i was having the same problem, when u place the sims card in the slot, make sure the little metal clip is slid up over the sims card to insure connection. I didnt realize at the time i was suppose to slid the that clip over the edge of the card. As soon as i did this it worked fine.

Posted on Jan 17, 2007

SOURCE: cant hear an incoming caller talk

Press the navigation key: right arrow to increase volume, left to decrease volume. Maximum volume is 7.

Posted on Feb 14, 2007

SOURCE: No deactivate call divert on the sttings menu

i went onto settings and there isnt any "call divert" option. I have a Motorola L6 please helkp its doing my head in!

Posted on May 12, 2008

SOURCE: My Motorola L6 shows that it is connnected to my H700

Make sure after you paired the bluetooth you press the connect button because the same thing happend to me

Posted on Nov 04, 2008

SOURCE: bluetooth

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select HS850 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Posted on Jan 31, 2009