So everytime i turn it on to listen to some music, i tap the touch arrow to scroll down & it wont go anywhere...i've had it for a few months & it's worked fine, but the past few days its stuck & wont scroll anywhere, how do i fix it?!
This happened to me before. What I did was that I found the little reset button and pressed it and I then turned the player back on and It worked normally again. Hope this helps P.S: The scroll buttons may be broken.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
With your remote, go into Menu. Then scroll down to setup and press the right arrow. Scroll down with the down arrow until you reach General and press the right arrow again. Scroll down once on Slide Key and press the right arrow. Now turn this feature on if not already. If the slide key does not slide out then consult Samsung for repair.
1Press the "Src/Off" button until the Pioneer CD player turns off.
Press and hold the "Src/Off" button again until the clock displays in the unit screen. In some Pioneer units, hold the "Multi-Control" button until "Clock Set" appears in the display.
Press the "F" (Function) button on the front of the CD player. In some units, press the "Multi-Control" button again to enter the setting mode.
Touch the left or right arrow buttons, or "Multi-Control," to select the segment of the time you want to change (e.g., hour or minute).
Tap the "Up" and "Down" arrow keys, or turn the "Multi-Control" button, to scroll through and select a number for that field. For example, if changing the hour to "2," scroll up or down until you get to the two. Use the right arrow to scroll over to the minute segment of the display. Use the "Up" and "Down" arrow keys to select the numbers that make up the appropriate number.
My Archos 1 Vision. Wont play a particular music file. It has played it amazingly fine since i bought it 3 months ago.
It was connected to my computer charging for a while, then i turned my system off so it was off for a while.
Wanted to listen to a few songs before bed,turned it on,selected Music,Scrolled down to the file i wanted,Went to select a song.........FROZEN!
I can turn it off but the same thing happens everytime i go to select something from this file
Please help i need music on my travels ;-)
The "Touchpad is very sensitive; if you look while scrolling, the "scroll-bar" will turn (Blue), click on the ("scroll-bar"), until it turn "Gray." Note: "You ca use the Pointer Device / Touchpad without using the Scroll-bar, basically anywhere on the screen; ("bottom scroll-pad" = left to right"), and ("right -side edge scroll-pad = up & down").
If you can't see any arrows to scroll with, press the ctrl key and tap the minus key. That will make the the page smaller so you can see if there are scroll bars.
Also, click anywhere on the page to make sure it is active and hit the down/up arrow keys, the page should roll down/up.
There are almost always roller buttons on the mouse you use that should also make the page scroll. Look in the middle of your mouse for a little wheel. Mice aren't all the same, so it may take some inspection. Thanks for using fixya.
The touch screen wont register if the unit has been reset and sometimes when it updates. Use the side buttons to control the cursor. Click the menu button, and then use the down arrow key to slect settings.click settings with the ok button. use the down arrow button to scroll down to display. click ok. The display screen will come up. Use the down arrow key to go to touch screen calibration. Use the ok button to select this option and follow the instructions. You will have to use the stylus to tap three calibration points on the touch screen and it should work fine from there.