My 80GB video iPOD is not turning on, instead the white apple symbol shows up and in 3 seconds the screan becomes blank again. While I charge the ipod, it’s acting in the same way....
Also the ipod is not detected in my PC.
Connect the ipod to your computer and let it sit for about fifteen minutes. Then it should show up in your computer and under itunes. Usually, if your ipod dies completely, when you try to charge it using a wall or car charger, it will do that, just flashing the apple logo and going back off. Leaving it plugged up to the computer will allow the battery to charge just enough so that it can sync with itunes. While it is plugged into the computer and charging, it should say something like, battery very low, charging. It should work after letting it sit plugged up to the computer.
214 views
Usually answered in minutes!
Well, I tried this already..but no difference.. the same old stuff happening " just flashing the apple logo and going back off " .
when i run a Diagnostics, the test got stucked in this step
Please plug FW
LCD ID: 1
FWPWR: 0
And that's all. the test never seems to finish. I have to reset to get out of it.
I have the same problem. The 80G classic is locked in a cycle of
apple logo
shuts down for 5secs
logo reappears
when attached to speakers there is what sounds like a hard drive attempting to start and failing.
×